User's Manual

NETGEAR genie ADVANCED Home

D6200 WiFi DSL Modem Router

 To change the MTU size:

1. Select ADVANCED > Setup > WAN Setup.

2. In

the MTU Size field, enter a new size from 64 through 1500.

3. Click Apply.

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host

Configuration Protocol (DHCP) and Routing Information Protocol (RIP).

The WiFi DSL modem router is shipped preconfigu

red to use private IP addresses on the

LAN side and to act as a DHCP server. The WiFi DSL modem router’s default LAN IP

configuration is:

• LAN IP addre

ss. 192.168.0.1

• Subnet

mask. 255.255.255.0

These addresses are part of the designated private address range for use in private networks

and shou

ld be suitable for most applications. If your network requires a different IP

addressing scheme, make changes in the LAN Setup screen.

Note: If you change the LAN IP address of the WiFi DSL modem router

while connected through the browser, you are disconnected. You

have to open a new connection to the new IP address and log in

again.

1436 Used in PPTP environments or with VPN.

1400 Maximum size for AOL DSL.

576 Typical value to connect to dial-up ISPs.

Table 8. Common MTU sizes (continued)

MTU Application