User Guide

Supplemental Information
154
AirCard Smart Cradle
Factory Settings
You can return the AirCard Smart Cradle its factory settings. Use the end of a paper clip or a
similar object to press and hold the Reset button on the back of the AirCard Smart Cradle for
at least seven seconds. The AirCard Smart Cradle resets and cradle returns to the factory
configuration settings shown in the following table. When the AirCard Smart Cradle restarts,
all LEDs on the front panel light.
Table 3. Factory default settings
Feature Default behavior
Smart Cradle
login
User login URL netgear.cradle or http://192.168.100.1
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default hardware address
WAN MTU size 1500
Port speed AutoSensing
Local network
(LAN)
LAN IP http://192.168.100.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.100.2 to 192.168.100.254
Time zone Pacific time
DHCP starting IP address 192.168.100.2
DHCP ending IP address 192.168.100.254
DMZ Disabled
Time zone GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA, GMT+10 for AU
Time zone adjusted for daylight
saving time
Disabled
SNMP Disabled
Firewall Inbound (communications coming
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
Enabled (all)
Source MAC filtering Disabled