Quick Reference Guide

Reference Manual for the Model DG814 DSL Modem Internet Gateway
Preparing Your Network 3-3
You must have an Ethernet adapter, the TCP/IP protocol, and Client for Microsoft Networks.
If you need the adapter:
1. Click the Add button.
2. Select Adapter, and then click Add.
3. Select the manufacturer and model of your Ethernet adapter, and then click OK.
If you need TCP/IP:
1. Click the Add button.
2. Select Protocol, and then click Add.
3. Select Microsoft.
4. Select TCP/IP, and then click OK.
Note: It is not necessary to remove any other network components shown in the
Network window in order to install the adapter, TCP/IP, or Client for Microsoft
Networks.