Quick Reference Guide

Reference Manual for the Model DG814 DSL Modem Internet Gateway
4-8 Basic Configuration of the Router
• Time for Sending Log
Specifies the time of day to send the log, using 23:59 notation. Relevant when the log is sent
daily.
•Time Zone
Specify your local time zone and click Apply. This setting will be used for the blocking
schedule and also for time-stamping log entries.
• Adjust for Daylight Savings Time
The gateway does not automatically adjust for daylight savings time. Check this box if you are
currently on daylight savings time.
If the Weekly, Daily or Hourly option is selected and the log fills up before the specified period,
the log is automatically e-mailed to the specified e-mail address. After the log is sent, the log is
cleared from the gateway’s memory. If the gateway cannot e-mail the log file, the log buffer may
fill up. In this case, the router overwrites the log and discards its contents.
The Model DG814 gateway uses the Network Time Protocol (NTP) to obtain the current time and
date from one of several Network Time Servers on the Internet. This menu displays the current
time.
Keyword
The Model DG814 gateway allows you to restrict access based on web addresses and web address
keywords. Up to 255 entries are supported in the Keyword list. The Keyword tab is shown below.
To enable keyword blocking, check Enable Keyword Blocking, then click Apply. Be sure that a
time period for blocking is specified on the Schedule setup screen.