Quick Reference Guide
Table Of Contents
- Reference Manual for the Model DG834 ADSL Firewall Router
- Contents
- Chapter 1 About This Guide
- Chapter 2 Introduction
- Chapter 3 Connecting the Router to the Internet
- What You Need Before You Begin
- Connecting the DG834 to Your LAN
- Auto-Detecting Your Internet Connection Type
- Testing Your Internet Connection
- Manually Configuring Your Internet Connection
- Chapter 4 Protecting Your Network
- Chapter 5 Managing Your Network
- Chapter 6 Advanced Configuration
- Chapter 7 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Network and Routing Basics
- Appendix C Preparing Your Network
- Preparing Your Computers for TCP/IP Networking
- Configuring Windows 95, 98, and Me for TCP/IP Networking
- Configuring Windows NT4, 2000 or XP for IP Networking
- DHCP Configuration of TCP/IP in Windows XP, 2000, or NT4
- Configuring the Macintosh for TCP/IP Networking
- Verifying the Readiness of Your Internet Account
- Restarting the Network
- Glossary
Reference Manual for the Model DG834 ADSL Firewall Router
3-8 Connecting the Router to the Internet
3.
LOG IN TO THE DG834.
Note: Your computer needs to be configured for DHCP. For instructions on configuring for
DHCP, please see Appendix C, “Preparing Your Network”.
a. Connect to the router by typing http://192.168.0.1 in the address field of Internet Explorer
or Netscape
®
Navigator.
Figure 3-7: Connect to the router
A login window opens as shown below:
Figure 3-8: Login window
b.
When prompted, enter admin for the user name and password for the password, both in
lower case letters. After logging in, you will see the menu below.