N300 Wireless ADSL2+ Modem Router DGN2200v4 User Manual March 2013 202-11157-01 350 East Plumeria Drive San Jose, CA 95134 USA
N300 Wireless ADSL2+ Modem Router DGN2200v4 Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com. Phone (US & Canada only): 1-888-NETGEAR.
Contents Chapter 1 Hardware Setup Unpack Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Label. . . . . . . . . . . . . . . . . . . . . . . .
N300 Wireless ADSL2+ Modem Router DGN2200v4 Chapter 4 NETGEAR genie Advanced Home NETGEAR genie Advanced Home Screen . . . . . . . . . . . . . . . . . . . . . . . . 34 Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 WPS Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 WAN Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
N300 Wireless ADSL2+ Modem Router DGN2200v4 Wireless Settings (2.4 GHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 View Logs of Web Access or Attempted Web Access . . . . . . . . . . . . . . . .75 Manage the Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 Back Up Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Restore Configuration Settings. . . . . . . . . . . . . . . . . . . . . . . . . . .
N300 Wireless ADSL2+ Modem Router DGN2200v4 Chapter 10 Troubleshooting Troubleshoot with the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Power LED Is Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Power LED Is Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 LAN LED Is Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. 1 Hardware Setup The N300 Wireless ADSL2+ Modem Router DGN2200v4 provides an easy and secure way to set up a wireless home network with fast access to the Internet. You can connect the modem router to a high-speed digital subscriber line (DSL) or behind a fiber cable modem using an Ethernet WAN interface. If you have not already set up your new modem router using the installation guide that comes in the box, this chapter walks you through the hardware setup.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Unpack Your Modem Router Your box should contain the following items: Your package might contain more items. The filter or splitter provided depends on the region, and in some locations, a CD is included. N300 Modem Router Phone Line ADSL Power adapter Filter/splitter Phone cable Ethernet cable Figure 1. Package contents If any parts are incorrect, missing, or damaged, contact your NETGEAR dealer.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Front Panel The modem router front panel has the status LEDs and icons shown in the figure. The WiFi and WPS icons are buttons. WPS button WiFi On/Off button Internet DSL Ethernet WAN USB LAN ports (1-4) Power Figure 2. Front panel LEDs and icons The following table describes the LEDs, icons, and buttons on the front panel. Table 1.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Table 1. Front panel icons for buttons and LEDs (continued) Icon Description Internet • • • • DSL • • • • WAN Network • • USB Solid green. You have an Internet connection. If the connection timed out based on the setting you entered in the Internet Setup screen, but the DSL connection is still present, the LED stays green. If the Internet connection is dropped for any other reason, the LED turns off. Solid red. The Internet (IP) connection failed.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Back Panel The back panel has the buttons and port connections as shown in the following figure. ADSL port LAN port or WAN cable/fiber Internet port Ethernet LAN ports USB port Reset button On/Off button Power adapter input Figure 3. Back panel connections and buttons For information about resetting the modem router to its factory settings, see Factory Settings on page 128.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Position Your Modem Router The modem router lets you access your network from virtually anywhere within the operating range of your wireless network. However, the operating distance or range of your wireless connection can vary significantly depending on the physical placement of your modem router. For example, the thickness and number of walls the wireless signal passes through can limit the range.
N300 Wireless ADSL2+ Modem Router DGN2200v4 separate DSL line for the modem router, the best thing to do is to use an ADSL microfilter with a built-in splitter (see Two-Line ADSL Microfilter on page 13). Plugs into DSL line Figure 5. One-line ADSL microfilter If you do not have a separate DSL line for the modem router, the second-best solution is to get a separate splitter.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Cable Your Modem Router You can use either a DSL or a cable/fiber Internet connection. DSL Internet or Phone Cable/fiber ADSL Line Figure 7. Cable connections CAUTION: Incorrectly connecting a filter to your modem router blocks your DSL connection. For help with installation, see the installation guide that came in the package with your product.
2. Access the Modem Router This chapter explains how to use NETGEAR genie to set up your modem router after you complete cabling as described in the installation guide and in the previous chapter.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Modem Router Setup Preparation You can set up your modem router with the NETGEAR genie automatically, or you can use the genie menus and screens to set up your modem router manually. Before you start the setup process, get your ISP information and make sure the computers and devices in the network have the settings described here.
N300 Wireless ADSL2+ Modem Router DGN2200v4 NETGEAR genie Setup NETGEAR genie runs on any device with a web browser. Installation and basic setup takes about 15 minutes to complete. To use NETGEAR genie to set up your modem router: 1. Turn on the modem router by pressing the On/Off button. 2. Make sure that your computer or wireless device is connected to the modem router with an Ethernet cable (wired) or wirelessly with the preset security settings listed on the bottom label. 3.
N300 Wireless ADSL2+ Modem Router DGN2200v4 If the modem router does not connect to the Internet: 1. Review your settings to be sure that you have selected the correct options and typed everything correctly. 2. Contact your ISP to verify that you have the correct configuration information. 3. Read Chapter 10, Troubleshooting. If problems persist, register your NETGEAR product and contact NETGEAR technical support.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Dashboard (Basic Home Screen) The modem router Basic Home screen has a dashboard that lets you see the status of your Internet connection and network at a glance. You can click any of the six sections of the dashboard to view and change the settings. The left column has menus. You can use the Advanced tab to access more menus and screens. Language Dashboard (Click to view details) Menus (Click the Advanced tab to view more) Help Figure 8.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Join Your Wireless Network You can use the manual or the WPS method to join your wireless network. For instructions about how to set up a guest network, see Set Up a Guest Network on page 31. Manual Method With the manual method, choose the network that you want and type its password to connect. To connect manually: 1. On your computer or wireless device, open the software that manages your wireless connections.
N300 Wireless ADSL2+ Modem Router DGN2200v4 NETGEAR genie App and Mobile genie App The genie app is the easy dashboard for managing, monitoring, and repairing your home network. See the NETGEAR genie App User Manual for details about the genie apps. Retrieve wireless password About genie Language Menu Dashboard (Click to view details) Support Figure 9. genie app dashboard The genie app can help you with the following: • Automatically repair common wireless network problems.
3. NETGEAR genie Basic Settings This chapter contains the following sections: • Internet Setup • Parental Controls • Basic Wireless Settings • Set Up a Guest Network • View Attached Devices For information about ReadySHARE USB storage, see Chapter 5, USB Storage.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Internet Setup The Internet Setup screen is where you view or change basic ISP information. Note: You can use the Setup Wizard to detect the Internet connection and automatically set up the modem router. See Setup Wizard on page 34. To view or change the basic Internet setup: 1. From the Home screen, select Internet.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Internet Setup Screen Fields The following descriptions explain all of the possible fields in the Internet Setup screen. The fields that display in this screen depend on whether tan ISP login is required. Does Your Internet connection require a login? Answer either yes or no. These fields display when no login is required: • Account Name (If required). Enter the account name provided by your ISP. This might also be called the host name.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Router MAC Address. The Ethernet MAC address that the modem router uses on the Internet port. Some ISPs register the MAC address of the network interface card in your computer when your account is first opened. They accept traffic only from the MAC address of that computer. This feature allows your modem router to use your computer’s MAC address (also called cloning). • Use Default Address. Use the default MAC address. • Use Computer MAC Address.
N300 Wireless ADSL2+ Modem Router DGN2200v4 After installation, Live Parental Controls automatically starts. 4. Click Next, read the note, and click Next again to proceed. Because Live Parental Controls uses free OpenDNS accounts, you are prompted to log in or create a free account. 5. Select the radio button that applies to you and click Next. • If you already have an OpenDNS account, leave the Yes radio button selected. • If you do not have an OpenDNS account, select the No radio button.
N300 Wireless ADSL2+ Modem Router DGN2200v4 After you log on or create your account, the filtering level screen displays: 6. Select the radio button for the filtering level that you want and click Next. 7. Click the Take me to the status screen button. Parental controls are now set up for the modem router. The dashboard shows Parental Controls as Enabled. Basic Wireless Settings The Wireless Settings screen lets you view or configure the wireless network setup.
N300 Wireless ADSL2+ Modem Router DGN2200v4 NETGEAR recommends that you do not change your preset security settings. If you change your preset security settings, make a note of the new settings and store it in a safe place where you can easily find it. If you use a wireless computer to change the wireless network name (SSID) or other wireless security settings, you are disconnected when you click Apply. To avoid this problem, use a computer with a wired connection to access the modem router.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Wireless Settings Screen Fields You can use this screen to view or change the wireless network settings and the security option. Wireless Network Enable SSID Broadcast. This setting allows the modem router to broadcast its SSID so wireless stations can see this wireless name (SSID) in their scanned network lists. This check box is selected by default. To turn off the SSID broadcast, clear this check box, and click Apply. Enable Wireless Isolation.
N300 Wireless ADSL2+ Modem Router DGN2200v4 WPA encryption is built into all hardware that has the Wi-Fi-certified seal. This seal means that the product is authorized by the Wi-Fi Alliance (http://www.wi-fi.org/) because it complies with the worldwide single standard for high-speed wireless local area networking. WPA uses a passphrase for authentication and to generate the initial data encryption keys. Then it dynamically varies the encryption key.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Set Up a Guest Network Adding a guest network allows visitors at your home to use the Internet without giving them your wireless security key. To set up a guest network: 1. Select Basic > Guest Network. 2. Select any of the following wireless settings: Enable Guest Network. When this check box is selected, the guest network is enabled, and guests can connect to your network using the SSID of this profile. Enable SSID Broadcast.
N300 Wireless ADSL2+ Modem Router DGN2200v4 View Attached Devices Use the Attached Device screen to view all computers or devices that are currently connected to your network. To go to the Attached Devices screen: From the Basic Home screen, select Attached Devices. Wired devices are connected to the modem router with Ethernet cables. Wireless devices have joined the wireless network. • # (number). The order in which the device joined the network. • IP Address.
4. NETGEAR genie Advanced Home This chapter contains the following sections: • NETGEAR genie Advanced Home Screen • Setup Wizard • WPS Wizard • WAN Setup • LAN Setup • Quality of Service (QoS) Setup Some selections on the Advanced Home screen are described in separate chapters: • USB Storage. See Chapter 5, USB Storage. • Security. See Chapter 6, Security. • Administration. See Chapter 7, Administration. • Advanced Setup. See Chapter 8, Advanced Settings. • Advanced VPN.
N300 Wireless ADSL2+ Modem Router DGN2200v4 NETGEAR genie Advanced Home Screen The genie Advanced Home dashboard presents status information. The content is the same as what is on the Router Status screen available from the Administration menu. The genie Advanced Home screen is shown in the following figure: This screen is also displayed through the Administration menu. Setup Wizard You can use the Setup Wizard to detect your Internet settings and automatically set up your modem router.
N300 Wireless ADSL2+ Modem Router DGN2200v4 The Setup Wizard searches your Internet connection for servers and protocols to determine your ISP configuration. The following screen displays: WPS Wizard The WPS Wizard helps you add a WPS-capable client device (a wireless device or computer) to your network. On the client device, either press its WPS button or locate its WPS PIN. To use the WPS Wizard: 1. Select Advanced > WPS Wizard. 2. Click Next.
N300 Wireless ADSL2+ Modem Router DGN2200v4 • To use the PIN method, select the PIN Number radio button, enter the client security PIN, and click Next. Within 2 minutes, go to the client device and use its WPS software to join the network without entering a password. The modem router attempts to add the WPS-capable device. The WPS LED on the front of the modem router blinks green.
N300 Wireless ADSL2+ Modem Router DGN2200v4 WAN Setup Screen Fields The following fields are available: • WAN Preference. By default this field is set to Auto-Detect so that the modem router automatically detects if the Internet connection is through the ADSL port or the WAN/Ethernet port 4. You can use this field to select Must use DSL WAN or Must use Ethernet WAN. • Use port 4 as. By default, Auto-Detect is selected so that the modem router detects if Ethernet port 4 is used as a LAN or WAN port.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Default DMZ Server The default DMZ server feature is helpful when you are using some online games and videoconferencing applications that are incompatible with Network Address Translation (NAT). The modem router recognizes some of these applications and works correctly with them, but other applications might not function well. In some cases, one local computer can run the application correctly if that computer’s IP address is entered as the default DMZ server.
N300 Wireless ADSL2+ Modem Router DGN2200v4 - Yahoo email - MSN portal - America Online’s DSL service • You use VPN and have severe performance problems. • You used a program to optimize MTU for performance reasons, and now you have connectivity or performance problems. Note: An incorrect MTU setting can cause Internet communication problems. For example, you might not be able to access certain websites, frames within websites, secure login pages, or FTP or POP servers.
N300 Wireless ADSL2+ Modem Router DGN2200v4 LAN Setup The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host Configuration Protocol (DHCP) and Routing Information Protocol (RIP). The modem router is shipped preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The modem router’s default LAN IP configuration is: • LAN IP address. 192.168.0.1 • Subnet mask. 255.255.255.
N300 Wireless ADSL2+ Modem Router DGN2200v4 2. Specify the settings that you want to customize (see LAN Setup Screen Settings). 3. Click Apply. Your changes are saved. LAN Setup Screen Settings The following settings are available. Device Name. By default, this is DGN2200v4 (the modem router model). You can change it to another name if you prefer. LAN TCP/IP Setup • IP Address. The LAN IP address of the modem router. • IP Subnet Mask. The LAN subnet mask of the modem router.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Specify DHCP Server Settings By default, the modem router is set up as a DHCP server. You can specify the range of addresses that the modem router assigns. You can also use another device on your network as the DHCP server, or specify the network settings of all of your computers. To specify the pool of IP addresses that the modem router assigns: 1. Select Advanced > LAN Setup. 2. Make sure that the Use Router as a DHCP Server check box is selected. 3.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Tip: If the computer is already on your network, you can copy its MAC address from the Attached Devices screen and paste it here. 5. Click Apply. The reserved address is entered into the table. The reserved address is not assigned until the next time the computer contacts the modem router’s DHCP server. Reboot the computer, or access its IP configuration and force a DHCP release and renew.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Set Up QoS for Internet Access You can give prioritized Internet access to the following types of traffic: • Specific applications • Specific online games • Individual Ethernet LAN ports of the modem router • A specific device by MAC address To specify prioritization of traffic, create a policy for the type of traffic and add the policy to the QoS Policy table in the QoS Setup screen.
N300 Wireless ADSL2+ Modem Router DGN2200v4 4. To add a priority rule, scroll down to the bottom of the QoS Setup screen and click Add Priority Rule. 5. In the QoS Policy for field, type the name of the application or game. 6. In the Priority Category list, select either Applications or Online Gaming. A list of applications or games displays. 7. Select an existing item from the list, scroll and select Add a New Application, or Add a New Game, as applicable. 8.
N300 Wireless ADSL2+ Modem Router DGN2200v4 6. From the QoS Policy for list, select the LAN port. 7. From the Priority list, select the priority for Internet access for this port’s traffic relative to other applications. The options are Low, Normal, High, and Highest. 8. Click Apply The rule is saved in the QoS Policy list. The QoS Setup screen displays. 9. In the QoS Setup screen, click Apply. QoS for a MAC Address To create a QoS policy for traffic from a specific MAC address: 1.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Edit or Delete an Existing QoS Policy To edit or delete a QoS policy: 1. Select Advanced > QoS Setup. 2. Select the radio button next to the QoS policy that you want to edit or delete, and do one of the following: • Click Delete to remove the QoS policy. • Click Edit to edit the QoS policy. Follow the instructions in the preceding sections to change the policy settings. 3. Click Apply. Your changes are saved in the QoS Setup screen.
5. 5 USB Storage This chapter describes how to access and configure a USB storage drive attached to your modem router. The USB port on the modem router can be used only to connect USB storage devices like flash drives or hard drives. Do not connect computers, USB modems, CD drives, or DVD drives to the modem router USB port.
N300 Wireless ADSL2+ Modem Router DGN2200v4 USB Drive Requirements The modem router works with 1.0 and 1.1 (USB Full Speed) and 2.0 (USB High Speed) standards. The approximate USB bus speeds are shown in the following table. Actual bus speeds can vary, depending on the CPU speed, memory, speed of the network, and other variables. Table 3. USB drive speeds Bus Speed/Sec USB 1.1 12 Mbits USB 2.0 480 Mbits The modem router works with most USB-compliant external flash and hard drives.
N300 Wireless ADSL2+ Modem Router DGN2200v4 It might take up to 2 minutes before the USB device is ready for sharing. Safely Remove a USB Drive If you want to physically disconnect a USB drive from the modem router USB port, first, log in to the modem router and safely remove it. To remove a USB disk drive safely: 1. Select USB Storage > Basic Settings. 2. Click the Safely Remove USB Device button. This takes the drive offline. 3. Physically disconnect the USB drive.
N300 Wireless ADSL2+ Modem Router DGN2200v4 3. Launch readyshareconnect.exe. 4. Select the drive letter to map to the network folder. 5. (Optional) If you want to connect to the USB drive as a different user, select the Connect using different credentials check box. a. Type the user name and password that you want to use. b. Click OK. 6. Click Finish. The USB drive is mapped to the drive letter that you specified. To access the USB drive from a remote computer: 1. Launch a web browser. 2.
N300 Wireless ADSL2+ Modem Router DGN2200v4 File-Sharing Scenarios You can share files on the USB drive for a wide variety of business and recreational purposes. The files can be any Windows, Mac, or Linux file type including text, Word, PowerPoint, Excel, MP3, pictures, and multimedia files. USB drive applications include: • Sharing multimedia with friends and family such as MP3 files, pictures, and other multimedia with local and remote users. • Sharing resources on your network.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Share Large Files over the Internet Sending files that are larger than 5 MB can pose a problem for many email systems. The modem router allows you to share large files such as PowerPoint presentations or .zip files over the Internet. FTP can be used to download shared files from the modem router. Sharing files with a remote colleague involves the following considerations: • There are two user accounts: admin and guest.
N300 Wireless ADSL2+ Modem Router DGN2200v4 USB Storage Device Network and Access Settings You can set up the device name, workgroups, and network folders for your USB device. To view or change the USB storage advanced settings: 1. Select Advanced > USB Storage > Advanced Settings. 2. Specify access to the USB storage device. • Network Device Name. The default is readyshare. This is the name used to access the USB device connected to the modem router. • Workgroup.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Available Network Folders You can view or change the network folders on the USB storage device. To view network folders: 1. Select Advanced > USB Storage > Advanced Settings. 2. Scroll down to the Available Networks Folder section of the screen. • Share Name. If only one device is connected, the default share name is USB_Storage. (Some router models have more than one USB port.
N300 Wireless ADSL2+ Modem Router DGN2200v4 3. To add a folder, click Create Network Folder. If the Add a Network Folder screen does not display, your web browser might be blocking pop-ups. If it is, then change the browser settings to allow pop-ups. 4. In the Folder field, browse and select the folder. 5. Fill in the Share Name field. 6. In the Read Access list and the Write Access list, select the setting that you want. The user name (account name) for All – no password is guest.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Specify Approved USB Devices For more security, you can set up the modem router to share only approved USB devices. To set up approved USB devices: 1. Select Advanced > Advanced Setup > USB Settings. 2. Click the Approved Devices button. This screen shows the approved USB devices and the available USB devices. You can remove or add approved USB devices. 3. In the Available USB Devices list, select the drive that you want to approve. 4. Click Add. 5.
6. 6 Security This chapter explains how to use the basic firewall features of the modem router to prevent objectionable content from reaching the computers and devices on your network.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Keyword Blocking of HTTP Traffic Use keyword blocking to prevent certain types of HTTP traffic from accessing your network. The blocking can be always or according to a schedule. To set up keyword blocking: 1. Select Advanced > Security > Block Sites. 2. Select one of the keyword blocking options: • Per Schedule. Turn on keyword blocking according to the Schedule screen settings. • Always.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Set Up Firewall Rules to Control Network Access Your modem router has a firewall that blocks unauthorized access to your wireless network and permits authorized inbound and outbound communications. Authorized communications are established according to inbound and outbound rules. The firewall has the following two default rules • Inbound. Block all access from outside except responses to requests from the LAN side. • Outbound.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Port Triggering to Open Incoming Ports Some application servers (such as FTP and IRC servers) send replies to multiple port numbers. Using the port triggering function of your modem router, you can tell the modem router to open more incoming ports when a particular outgoing port originates a session. An example is Internet Relay Chat (IRC). Your computer connects to an IRC server at destination port 6667.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Port Forwarding to Permit External Host Communications In both of the preceding examples, your computer initiates an application session with a server computer on the Internet. However, you might need to allow a client computer on the Internet to initiate a connection to a server computer on your network. Normally, your modem router ignores any inbound traffic that is not a response to your own outbound traffic.
N300 Wireless ADSL2+ Modem Router DGN2200v4 How Port Forwarding Differs from Port Triggering The following points summarize the differences between port forwarding and port triggering: • Port triggering can be used by any computer on your network, although only one computer can use it at a time. • Port forwarding is configured for a single computer on your network. • With port triggering, the modem router does not need to know the computer’s IP address in advance.
N300 Wireless ADSL2+ Modem Router DGN2200v4 2. From the Service Name list, select the service or game that you will host on your network. If the service does not appear in the list, see Add a Custom Service on page 64. 3. In the Action list, select when you want to allow or block this port forwarding rule. 4. In the Server IP Address field, enter IP address of your local computer that will receive the inbound traffic covered by this rule. 5.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Edit or Delete a Port Forwarding Entry To edit or delete a port forwarding entry: 1. In the table, select the radio button next to the service name. 2. Click Edit Service or Delete Service. Application Example: Make a Local Web Server Public If you host a web server on your local network, you can use port forwarding to allow web requests from anyone on the Internet to reach your web server. To make a local web server public: 1.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Note: If you use applications such as multiplayer gaming, peer-to-peer connections, real-time communications such as instant messaging, or remote assistance (a feature in Windows XP), you should also enable Universal Plug and Play (UPnP). To configure port triggering, you need to know which inbound ports the application needs, and the number of the outbound port that will trigger the opening of the inbound ports.
N300 Wireless ADSL2+ Modem Router DGN2200v4 To add a port triggering service: 1. On the Port Triggering screen, click Add Service. 2. In the Service Name field, type a descriptive service name. 3. In the Service User list, select Any or Single address and enter the IP address of one computer. • Any (the default), allows any computer on the Internet to use this service. • Single address restricts the service to a particular computer. 4. Select the service type, either TCP or UDP or both (TCP/UDP).
N300 Wireless ADSL2+ Modem Router DGN2200v4 Schedule When to Block the Internet You can specify the days and time that you want to block Internet access. To schedule blocking: 1. Select Advanced > Security > Schedule. 2. Set up the schedule for blocking keywords and services. • Days to Block. Select days on which you want to apply blocking by selecting the appropriate check boxes, or select Every Day to select the check boxes for all days. • Time of Day to Block.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Security Event Email Notifications To receive logs and alerts by email, provide your email information in the E-mail screen, and specify which alerts you want to receive and how often. To set up email notifications: 1. Select Advanced > Security > E-mail. 2. Select the Turn Email Notification On check box. 3. In the Your Outgoing Mail Server field, enter the name of your ISP’s outgoing (SMTP) mail server (such as mail.myISP.com).
7. 7 Administration Manage you r ne twork This chapter describes the modem router settings for administering and maintaining your modem router and home network. See Remote Management on page 90 for information about upgrading or checking the status of your modem router over the Internet. See Traffic Meter on page 102 for information about monitoring Internet traffic.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Update the Modem Router Firmware The modem router firmware (routing software) is stored in flash memory. You can update the firmware from the Administration menu on the Advanced tab. You might see a message at the top of the genie screens when new firmware is available for your product. You can use the Check button on the Router Update screen to check and update to the latest firmware for your product if new firmware is available.
N300 Wireless ADSL2+ Modem Router DGN2200v4 View Router Status To view modem router status and usage information: Select Advanced Home or select Administration > Router Status. Router Information Hardware Version. The modem router model. Firmware Version. The version of the modem router firmware. It changes if you upgrade the modem router firmware. GUI Language Version. The localized language of the user interface. LAN Port. • MAC Address. The Media Access Control address.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Connection. This shows if the modem router is using a fixed IP address on the WAN. If the value is DHCP Client, the modem router obtains an IP address dynamically from the ISP. IP Subnet Mask. The IP subnet mask used by the Internet (WAN) port of the modem router. Domain Name Server. The Domain Name Server addresses used by the modem router. A Domain Name Server translates human-language URLs such as www.netgear.com into IP addresses.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Connection Status Button To view the Internet connection status: 1. Select Advanced Home or select Administration > Router Status. 2. In the Internet Connection pane, click the Connection Status button. The following information displays: • Connection Time. The time elapsed since the last connection to the Internet through the DSL port. • Connection Status. On or Off. • Negotiation. On or Off. • Authentication. On or Off. • IP Address.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Mode. The wireless communication mode: Up to 54 Mbps, Up to 217 Mbps (default), and Up to 1300 Mbps. Wireless AP. Indicates whether the radio feature of the modem router is enabled. If this feature is not enabled, the WiFi LED on the front panel is off. Broadcast Name. Indicates whether the modem router is broadcasting its SSID. Wireless Isolation. Wireless isolation prevents wireless clients from communicating with each other when they join the wireless network.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Manage the Configuration File The configuration settings of the modem router are stored within the modem router in a configuration file. You can back up (save) this file to your computer, restore it, or reset it to the factory default settings. Back Up Settings To back up the modem router’s configuration settings: 1. Select Advanced > Administration > Backup Settings. 2. Click Backup Settings. A copy of the current settings is saved. 3.
N300 Wireless ADSL2+ Modem Router DGN2200v4 You can also use the Restore Factory Settings button on the back of the modem router to erase the configuration and restore the factory settings. (See Factory Settings on page 128),. To erase the configuration settings: Click the Erase button. The factory default settings are restored. The user name is admin, the password to password, and the LAN IP address is 192.168.0.1. DHCP is enabled.
N300 Wireless ADSL2+ Modem Router DGN2200v4 To recover your password: 1. In the address field of your browser, type www.routerlogin.net. A login window displays. 2. Click Cancel. If password recovery is enabled, you are prompted to answer two security questions. 3. Enter the saved answers to the security questions.
8. 8 Advanced Settings This chapter describes the advanced features of your modem router. Networking knowledge is needed to implement some of these features. Note: The Port Forwarding/Port Triggering screen can be accessed both through the Advanced Setup menu and through the Firewall Rules screen. For information about port forwarding and port triggering, see Chapter 6, Security.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Advanced Wireless Settings You can use this screen to turn on and off the wireless radio, to specify WPS settings, to use AP mode, and to set up a wireless access list. The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options in this screen are reserved for wireless testing and advanced configuration only. Do not change these settings unless you have a specific reason to do so.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Set Up a Wireless Schedule You can use this feature to turn off the wireless signal from your modem router at times when you do not need a wireless connection. For example, you could turn it off for the weekend if you leave town. To configure and enable the wireless schedule: 1. Select Advanced > Advanced Setup > Wireless Settings. The Advanced Wireless Settings screen displays. 2. Click the Add a new period button. The screen adjusts: 3.
N300 Wireless ADSL2+ Modem Router DGN2200v4 modem router’s PIN through WPS. You can manually enable the PIN function by clearing the Disable Router’s PIN check box. 3. (Optional) Select or clear the Keep Existing Wireless Settings check box. By default, the Keep Existing Wireless Settings check box is selected. NETGEAR recommends that you leave this check box selected.
N300 Wireless ADSL2+ Modem Router DGN2200v4 You can copy and paste the MAC addresses from the Attached Devices screen into the MAC Address field of this screen. To do this, use each wireless computer to join the wireless network. The computer should then appear in the Attached Devices screen. 5. Click Add. The screen changes back to the list screen. 6. Add each computer or device you want to allow to connect wirelessly. 7. Select the Turn Access Control On check box. 8. Click Apply.
N300 Wireless ADSL2+ Modem Router DGN2200v4 5. If the other router or gateway in your network also has wireless capability, NETGEAR recommends that you use a different wireless channel. 6. Click Apply. The IP address of the modem router changes and you are disconnected. To reconnect, close and restart your web browser, and type http://www.routerlogin.net. Wireless Distribution System (WDS) You can set up the modem router to be used as a wireless access point (AP).
N300 Wireless ADSL2+ Modem Router DGN2200v4 wired local computers. To configure this mode, you have to know the MAC addresses of the child repeater access point. Often, the MAC address is on the product label. Wireless Repeater. The modem router sends all traffic from its local wireless or wired computers to a remote access point. To configure this mode, you have to know the MAC address of the remote parent access point.
N300 Wireless ADSL2+ Modem Router DGN2200v4 5. (Optional) Select the Disable Wireless Client Association check box to prevent wireless clients from associating with the base station and allowing LAN client associations only. You can leave the check box cleared if you prefer wireless clients to be able to associate with the base stations. 6. In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access points that should function as repeaters.
N300 Wireless ADSL2+ Modem Router DGN2200v4 This IP address has to be in the same subnet as the base station, but different from the LAN IP address of the base station. 7. (Optional) Select the Disable 8. In the Base Station MAC Address field, 9. Click Apply. Your changes are saved. 10. Verify connectivity across the LANs.
N300 Wireless ADSL2+ Modem Router DGN2200v4 4. Select the URL of your Dynamic DNS service provider. 5. Type the host name (or domain name) that your Dynamic DNS service provider gave you. 6. Type the user name for your Dynamic DNS account. This is the name that you use to log in to your account, not your host name. 7. Type the password (or key) for your Dynamic DNS account. 8. Click Apply. Your changes are saved. Static Routes Static routes provide more routing information to your modem router.
N300 Wireless ADSL2+ Modem Router DGN2200v4 2. Click Add. 3. In the Route Name field, type a name for this static route (for identification purposes only.) 4. Select the Private check box if you want to limit access to the LAN only. If Private is selected, the static route is not reported in RIP. 5. Select the Active check box to make this route effective. 6. Type the destination IP address of the final destination. 7. Type the IP subnet mask for this destination.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Remote Management The remote management feature lets you upgrade or check the status of your modem router over the Internet. Note: Be sure to change the modem router default login password to a secure password. The ideal password contains no dictionary words from any language and contains uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters. To set up remote management: 1. Select Advanced > Advanced Setup > Remote Management.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Normal web browser access uses the standard HTTP service port 80. For greater security, enter a custom port number for the remote web management interface. Choose a number from 1024 to 65535, but do not use the number of any common service port. The default is 8080, which is a common alternate for HTTP. 5. Click Apply. Your changes take effect. 6.
N300 Wireless ADSL2+ Modem Router DGN2200v4 compromise the freshness of the device status, but can significantly reduce network traffic. 4. Type the advertisement time to live in hops. The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. The time to live hop count is the number of steps a broadcast packet is allowed to propagate for each UPnP advertisement before it disappears. The number of hops can range from 1 to 255.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Your changes take effect. Requirements for Entering IPv6 Addresses IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by colons. Any four-digit group of zeroes within an IPv6 address can be reduced to a single zero or altogether omitted.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Auto Detect To set up an IPv6 Internet connection through auto detection: 1. Select Advanced > Advanced Setup > IPv6. The IPv6 screen displays. 2. In the Internet Connection Type list, select Auto Detect. The screen adjusts: The modem router automatically detects the information in the following fields: • Connection Type. This field indicates the connection type that is detected. • Router’s IPv6 Address on WAN.
N300 Wireless ADSL2+ Modem Router DGN2200v4 IPv6 Auto Config To set up an IPv6 Internet connection through auto configuration: 1. Select Advanced > Advanced Setup > IPv6. The IPv6 screen displays. 2. In the Internet Connection Type list, select Auto Config. The screen adjusts: The modem router automatically detects the information in the following fields: • Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired for the modem router’s WAN (or Internet) interface.
N300 Wireless ADSL2+ Modem Router DGN2200v4 • Use DHCP Server. This method passes more information to LAN devices, but some IPv6 systems might not support the DHCv6 client function. • Auto Config. This is the default setting. 6. (Optional) Select the Use This Interface ID check box, and specify the interface ID that you want to be used for the IPv6 address of the modem router’s LAN interface. If you do not specify an ID here, the modem router generates one automatically from its MAC address. 7.
N300 Wireless ADSL2+ Modem Router DGN2200v4 3. Configure the remote 6to4 relay modem router settings by selecting one of the following buttons: • Auto. Your modem router uses any remote relay router that is available on the Internet. This is the default setting. • Static IP Address. Enter the static IPv4 address of the remote relay router. This address is usually provided by your IPv6 ISP. 4.
N300 Wireless ADSL2+ Modem Router DGN2200v4 The screen adjusts: 3. Configure the fixed IPv6 addresses for the WAN connection. The following fields are included in this screen: • IPv6 Address/Prefix Length. The IPv6 address and prefix length of the modem router WAN interface. • Default IPv6 Gateway. The IPv6 address of the default IPv6 gateway, which is supposed to be on the modem router’s WAN interface. • Primary DNS Server.
N300 Wireless ADSL2+ Modem Router DGN2200v4 IPv6 DHCP To set up an IPv6 Internet connection with a DHCP server: 1. Select Advanced > Advanced Setup > IPv6. The IPv6 screen displays. 2. In the Internet Connection Type list, select DHCP. The screen adjusts: The modem router automatically detects the information in the following fields: • Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired for the modem router’s WAN (or Internet) interface.
N300 Wireless ADSL2+ Modem Router DGN2200v4 • Use DHCP Server. This method passes more information to LAN devices, but some IPv6 systems might not support the DHCv6 client function. • Auto Config. This is the default setting. 6. (Optional) Select the Use This Interface ID check box, and specify the interface ID that you want to be used for the IPv6 address of the modem router’s LAN interface. If you do not specify an ID here, the modem router generates one automatically from its MAC address. 7.
N300 Wireless ADSL2+ Modem Router DGN2200v4 This is usually the name that you use in your email address. For example, if your main mail account is JerAB@ISP.com, then you would type JerAB in this field. Some ISPs (like Mindspring, Earthlink, and T-DSL) require that you use your full email address when you log in. If your ISP requires your full email address, type it in this field. 4. In the Password field, enter the password for the ISP connection. 5. In the Service Name name field, enter a service name.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Traffic Meter Traffic metering allows you to monitor the volume of Internet traffic that passes through the modem router Internet port. You can set limits for traffic volume. To monitor Internet traffic: 1. Click Advanced > Advanced Setup > Traffic Meter. Scroll to view more settings 2. Select the Enable Traffic Meter check box. 3. (Optional) Control the volume of Internet traffic.
N300 Wireless ADSL2+ Modem Router DGN2200v4 • The Internet LED flashes green or amber. • The Internet connection is disconnected and disabled. 7. Click the Apply button. The Internet Traffic Statistics section helps you to monitor the data traffic. Click the Refresh button to update the Traffic Statistics section. Click the Traffic Status button to display more information about the data traffic on your modem router and to change the poll interval.
9. Virtual Private Networking 9 This chapter describes how to use the virtual private networking (VPN) features of the modem router. VPN communications paths are called tunnels. VPN tunnels provide secure, encrypted communications between your local network and a remote network or computer.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Overview of VPN Configuration The modem router supports both client-to-gateway and gateway-to-gateway VPN tunnels. The modem router supports up to five concurrent tunnels. Client-to-Gateway VPN Tunnels Client-to-gateway VPN tunnels provide secure access from a remote computer, such as a telecommuter connecting to an office network. VPN tunnel Modem router PC running NETGEAR ProSafe VPN Client Figure 13.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Set Up a Client-to-Gateway VPN This section describes using the VPN Wizard to set up the VPN tunnel. If you want to manually specify the settings, see Auto Policy Example on page 112. To configure a client-to-gateway VPN tunnel: 1. Select Advanced > Advanced - VPN > VPN Wizard. 2. Click Next. 3. Fill in the Connection Name and pre-shared key fields. The connection name is for convenience and does not affect how the VPN tunnel functions. 4.
N300 Wireless ADSL2+ Modem Router DGN2200v4 5. Click Done. The VPN Policies screen displays, showing that the new tunnel is enabled: 6. (Optional) To view or modify a tunnel’s settings, select its radio button and click Edit. 7. Use VPN client software on the computer to configure it as a VPN client. Add a Gateway-to-Gateway VPN Tunnel This section describes how to use the VPN Wizard to set up the VPN tunnel between two gateways. The LAN IP address ranges of each VPN endpoint have to be different.
N300 Wireless ADSL2+ Modem Router DGN2200v4 4. Fill in the Connection Name and pre-shared key fields. Select the A remote VPN Gateway radio button and click Next. 5. Fill in the IP address or FQDN for the target VPN endpoint WAN connection, and click Next. 6. Fill in the IP Address and Subnet Mask fields for the target endpoint that can use this tunnel, and click Next.
N300 Wireless ADSL2+ Modem Router DGN2200v4 The VPN Policies screen displays, showing that the new tunnel is enabled. 8. Repeat these steps for the gateway on LAN B, and pay special attention to the following network settings: • WAN IP of the remote VPN gateway (for example, 14.15.16.17) • LAN IP settings of the remote VPN gateway: - IP address (for example, 192.168.0.1) - Subnet mask (for example, 255.255.255.
N300 Wireless ADSL2+ Modem Router DGN2200v4 View or Change the Status of a VPN Tunnel The VPN Status/Log screen displays the status. To check the status of a VPN tunnel: 1. Select Advanced > Advanced - VPN > VPN Status. The VPN Status/Log screen displays: This log shows the details of recent VPN activity, including the building of the VPN tunnel. If there is a problem with the VPN tunnel, refer to the log for information about what might be the cause of the problem. 2.
N300 Wireless ADSL2+ Modem Router DGN2200v4 • SLifeTime (Secs). The remaining soft lifetime for this SA in seconds. When the soft lifetime becomes 0 (zero), the SA (security association) is renegotiated. • HLifeTime (Secs). The remaining hard lifetime for this SA in seconds. When the hard lifetime becomes 0 (zero), the SA (security association) is terminated. (It is reestablished if necessary.) Deactivate a VPN Tunnel Sometimes a VPN tunnel has to be deactivated for testing purposes.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Delete a VPN Tunnel To delete VPN tunnel: 1. Select Advanced > Advanced - VPN > VPN Policies. 2. Select the radio button for the VPN tunnel. 3. Click Delete. Auto Policy Example You need to configure matching VPN settings on both VPN endpoints. The outbound VPN settings on one end have to match to the inbound VPN settings on other end, and vice versa Auto policy creates a typical automated Internet Key Exchange (IKE) setup.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Add or Edit a VPN Auto Policy An Auto VPN policy uses the IKE (Internet Key Protocol) to exchange and negotiate parameters for the IPSec SA (security association). Because of this negotiation, not all of the settings on this VPN gateway have to match the settings on the remote VPN endpoint. Where settings have to match, this requirement is indicated. To add an Auto policy: 1.
N300 Wireless ADSL2+ Modem Router DGN2200v4 4. Specify the Local LAN settings: • From the IP Address list, select Subnet address, Single address, or Range address. • Fill in the Single/Start IP Address field. • If you are specifying a range, fill in the Finish IP Address field. This range must be an address range used on your LAN. For a single IP address, do not fill in the Finish IP Address field. The remote VPN endpoint must have these IP addresses entered as its remote addresses. 5.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Select the option that matches the Local Identity Type setting on the remote VPN endpoint. - IP Address. The Internet IP address of the remote VPN endpoint. - Fully Qualified Domain Name. The domain name of the remote VPN endpoint. - Fully Qualified User Name. The name, email address, or other ID of the remote VPN endpoint. 7. Specify the following parameters: • Select the encryption algorithm. This is the encryption algorithm used for both IKE and IPSec.
N300 Wireless ADSL2+ Modem Router DGN2200v4 The VPN Policies screen displays: 9. Repeat these steps for the gateway on LAN B. Pay special attention to the following network settings: • General, Remote Address Data (for example, 14.15.16.17) • Remote LAN, Start IP Address - IP Address (for example, 192.168.0.1) - Subnet Mask (for example, 255.255.255.0) - Pre-shared Key (for example, 12345678) 10.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Add or Edit a Manual VPN Policy A manual VPN policy requires all settings for the VPN tunnel to be manually entered at each end (both VPN endpoints). To add or edit a manual policy: 1. Select Advanced > Advanced - VPN > VPN Policies and click the Add Manual Policy radio button. The VPN - Manual Policy screen displays. 2. Specify the general settings: • In the Policy Name field, enter a unique name. This name is not supplied to the remote VPN endpoint.
N300 Wireless ADSL2+ Modem Router DGN2200v4 4. Specify the Remote LAN settings. • From the IP Address list, select Single PC -no Subnet, Single address, Range address, or Subnet address. If there is no LAN (only a single computer) at the remote endpoint, select the Single PC -no Subnet option. The Single address option is typically used to access a server on the remote LAN. • If you want to specify a range, fill in the Finish IP Address field. This range must be an address range used on the remote LAN.
10. 10 Troubleshooting This chapter provides information to help you diagnose and solve problems you might have with your modem router. If you do not find the solution here, check the NETGEAR support site at http://support.netgear.com for product and contact information.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Troubleshoot with the LEDs When you turn on the power, the power, LAN, and DSL LEDs should light as described here. If they do not, refer to the sections that follow for help. 1. When power is first applied, the Power LED lights. 2. After approximately 10 seconds, the LAN and DSL LEDs light as follows: a. The LAN port LEDs light for any local ports that are connected. b. The DSL link LED lights green to indicate that a DSL link is established. c.
N300 Wireless ADSL2+ Modem Router DGN2200v4 • You are using the correct cable. Cannot Log In to the Modem Router If you are unable to log in to the modem router from a computer on your local network, check the following: • If you are using an Ethernet-connected computer, check the Ethernet connection between the computer and the modem router as described in the previous section. • Make sure that your computer’s IP address is on the same subnet as the modem router.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Troubleshoot the Internet Connection If your modem router is unable to access the Internet, check the ADSL connection, then the WAN TCP/IP connection. ADSL Link If your modem router is unable to access the Internet, first determine whether you have an ADSL link with the service provider. The state of this connection is indicated with the Internet LED. ADSL Link LED Is Green If your ADSL link LED is green, you have a good ADSL connection.
N300 Wireless ADSL2+ Modem Router DGN2200v4 • Check that your login credentials are correct, or that the information you entered on the Internet Setup screen is correct. • Check if your ISP has a problem—it might not be that the modem router cannot connect to the Internet, but rather that your ISP that cannot provide an Internet connection.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Unless you connect manually, the modem router does not authenticate using PPPoE or PPPoA until data is transmitted to the network. Troubleshoot Internet Browsing If your modem router can obtain an IP address, but your computer is unable to load any web pages from the Internet: • Your computer might not recognize any DNS server addresses. A DNS server is a host on the Internet that translates Internet names (such as www addresses) to numeric IP addresses.
N300 Wireless ADSL2+ Modem Router DGN2200v4 If the path is not working, you see this message: Request timed out If the path is not functioning correctly, you could have one of the following problems: • Wrong physical connections Make sure that the LAN port LED is lit. If the LED is off, follow the instructions in LAN LED Is Off on page 120. • Wrong network configuration - Verify that the Ethernet card driver software and TCP/IP software are both installed and configured on your computer or workstation.
N300 Wireless ADSL2+ Modem Router DGN2200v4 • When entering configuration settings, always click the Apply button before moving to another screen or tab, or your changes are lost. • Click the Refresh or Reload button in the web browser. The changes might have occurred, but the old settings might be in the web browser’s cache. Incorrect Date or Time The modem router uses the Network Time Protocol (NTP) to obtain the current time from one of several network time servers on the Internet.
A. Supplemental Information A This appendix includes the factory default settings and technical specifications for the modem router, and instructions for wall-mounting the unit.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Factory Settings You can return the modem router to its factory settings. On the back of the modem router, use the end of a paper clip or some other similar object to press and hold the Reset button for at least 7 seconds. The modem router returns to the factory settings shown in the following table. Table 4. Factory default settings Feature Router Login Internet connection Local network (LAN) Firewall Default Behavior User login URL www.routerlogin.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Table 4. Factory default settings (Continued) Feature Wireless Default Behavior Wireless communication Enabled SSID name Can be found on the label on the bottom of the unit. Security Can be found on the label on the bottom of the unit.
N300 Wireless ADSL2+ Modem Router DGN2200v4 Specifications Table 5. Specification Description Network protocol and standards compatibility TCP/IP, RIP-1, RIP-2, DHCP, PPPoE or PPPoA, RFC 1483 Bridged or Routed Ethernet, and RFC 1577 Classical IP over ATM Power adapter North America: 120V, 60 Hz, input UK, Australia: 240V, 50 Hz, input Europe: 230V, 50 Hz, input All regions (output): 12V @ 1A output Physical Dimensions: 6.80 in. x 5.03 in. x 1.28 in. (173 mm x 128 mm x 33 mm) Weight: 0.65 lbs.
B. Notification of Compliance N E T GEAR wirele ss rout er s , gat eway s , APs B Regulatory Compliance Information This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable National regulatory authority.
N300 Wireless ADSL2+ Modem Router DGN2200v4 FCC Radio Frequency Interference Warnings & Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
N300 Wireless ADSL2+ Modem Router DGN2200v4 préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. NOTE IMPORTANTE: Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
