Manualshelf

Operation Manual

ManualsBrandsNetgear ManualscomputerDGN2200Bv4
101102103104105106107108109110
Virtual Private Networking
107
N300 Wireless ADSL2+ Modem Router DGN2200v4
5. Click Done.
The VPN Policies screen displays, showing that the new tunnel is enabled:
6. (Optional) To view or modify a tunnel’s settings, select its radio button and click Edit.
7. Use VPN client software on the computer to configure it as a VPN client.
Add a Gateway-to-Gateway VPN Tunnel
This section describes how to use the VPN Wizard to set up the VPN tunnel between two
gateways. The LAN IP address ranges of each VPN endpoint have to be different. The
connection will fail if both are using the default address range of 192.168.0.x.
To add a gateway-to-gateway VPN tunnel:
1. Log in to Gateway
A on LAN A.
2. Select Advanced >
Advanced - VPN > VPN Wizard.
3. Click Next.