Operation Manual

Virtual Private Networking
109
N300 Wireless ADSL2+ Modem Router DGN2200v4
The VPN Policies screen displays, showing that the new tunnel is enabled.
8. Repeat these steps for the gateway on LAN B, and pay special attention to the following
network settings:
• W
AN IP of the remote VPN gateway (for example, 14.15.16.17)
• LAN IP settings of the remote VPN gateway:
- IP address (for example, 192.168.0.1)
- Subnet mask (for example, 255.255.255.0)
- Pre-shared key (for example, 12345678)
Activate a VPN Tunnel
To activate a VPN tunnel, you can use the VPN Status screen or start using the tunnel.
 To use the VPN Status screen to activate a VPN tunnel:
1. Select Advanced >
Advanced - VPN > VPN Status, and click the VPN Status button.
The Current VPN Tunnels (SAs) screen displays.
2. Click Connect for the VPN tunnel that you want to activate.
 To activate a VPN tunnel by using it:
Use a web browser to go to a URL whose IP address or range is covered by the policy for
that VPN tunnel.