Operation Manual

Virtual Private Networking
117
N300 Wireless ADSL2+ Modem Router DGN2200v4
Add or Edit a Manual VPN Policy
A manual VPN policy requires all settings for the VPN tunnel to be manually entered at each
end (both VPN endpoints).
 To add or edit a manual policy:
1. Select Advanced >
Advanced - VPN > VPN Policies and click the Add Manual Policy
radio button.
The VPN - Manual Policy screen displays.
2. Specify the general settings:
• In the Policy Name field, enter a unique name.
This name is not supplied to the remote VPN endpoint. It is used only to help you
manage the policies.
• From the
Address Type list, select Fully Qualified Domain Name, or select Fixed IP
Address and fill in the Address Data field.
You can set up multiple remote dynamic IP policies, but only one such policy can be
enabled at a time.
3. Specify the Local LAN settings:
• From the IP
Address list, select Subnet address, Single address, or Range
address.
• Fill in the Single/Start IP
Address field.
• If you are specifying a range, fill in the Finish IP
Address field.
This range must be an address range used on your LAN. For a single IP address, do
not fill in the Finish IP
Address field.
The remote VPN endpoint must have these IP addresses entered as its remote
addresses.