Operation Manual

NETGEAR genie Advanced Home

N300 Wireless ADSL2+ Modem Router DGN2200v4

• To use the PIN method, select the PIN Number radio button, enter the client security

PIN, and click Next.

Within 2 minutes, go to the client device and use its WPS software to join the network

without entering a password.

The modem router attempts to add the WPS-capable device. The WPS LED on the

front of the modem router blinks green. When the modem router establishes a WPS

connection, the LED is solid green, and the modem router WPS screen displays a

confirmation message.

WAN Setup

You can use the WAN Setup screen to specify the ADSL or Ethernet port setting for your

Internet connection, though by default the modem router automatically detects the Internet

port. The WAN Setup screen also lets you configure a DMZ (demilitarized zone) server,

change the maximum transmit unit (MTU) size, and enable the modem router to respond to a

ping on the WAN (Internet) port.

 To view or change the WAN settings:

1. Select Advanced > Setup > W

AN Setup.

2. Specify the settings for your Internet connection.

The fields in this screen are described in the following section.

3. Click Apply.