Operation Manual

Hardware Setup
9
N300 Wireless ADSL2+ Modem Router DGN2200v4
Front Panel
The modem router front panel has the status LEDs and icons shown in the figure. The WiFi
and WPS icons are buttons.
WPS button
W
iFi On/Off button
Internet
DSL
Ethernet WAN
USB
LAN ports (1-4)
Power
Figure 2. Front panel LEDs and icons
The following table describes the LEDs, icons, and buttons on the front panel.
Table 1. Front panel icons for buttons and LEDs
Icon Description
WPS button • Pressing this button lets you use Wi-Fi Protected Setup (WPS) to join the
network. (see Wi-Fi Protected Setup (WPS) Method on page 20).
• Solid green. Wireless security has been enabled.
• Blinking green. A
WPS-capable device is connecting to the device.
• Off. WPS is not enabled.
WiFi On/Off button Pressing this button turns on and off the wireless radio in the modem router. By
default, WiFi is on.
• Solid green. There
is WiFi connectivity.
• Blinking green. Data is being transmitted or received over the WiFi link.
• Off.
There is no WiFi connectivity. You can still plug an Ethernet cable into one of
the LAN ports to get wired connectivity. For more information about the use of
this button, see Advanced Wireless Settings on page 80.