Owner's Manual

RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
2-18 Safeguarding Your Network
v1.0, September 2009
To configure a wireless guest network:
1. In the main menu, under Setup, select either Wireless Guest Network g/b or Wireless Guest
Network a, n. A Wireless Guest Network Settings screen similar to the following figure
displays:
2. Make sure that the Enable Guest Network check box is selected.
3. You can specify whether the SSID broadcast is enabled, and whether you want to allow the
guest to access your local network. You can also change the Guest Wireless Network Name
(SSID), enter a name in the field.
Up to 130Mbps at 5GHz &
54Mbps at 2.4GHz
Guest Network a/n NETGEAR-2.4G_n_Guest1 • 5GHz 802.11a
• 5GHz 802.11n
Guest Network b/g NETGEAR-2.4G_g_Guest1 • 2.4GHz 802.11g
• 2.4GHz 802.11b
Up to 130 Mbps at 2.4GHz Guest Network a/n NETGEAR-2.4G_n_Guest1 • 2.4GHz 802.11n
• 2.4GHz 802.11g
• 2.4GHz 802.11b
Figure 2-9
Note: NETGEAR strongly recommends that you change the default guest network
name (SSID) from the default name to a different name. Note that the name is
case-sensitive. For example, GuestNetwork is not the same as Guestnetwork.
Table 2-2. Wireless Modes and Guest Networks (continued)
Mode in Wireless Settings
Screen
Menu Selection Guest Network Default SSID
Wireless
Compatibility