User's Manual

Advanced Settings
136
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
• All APs, including the DGND3700 wireless modem router, have to use the same
SSID, channel, authentication mode, if any, and WEP security settings if security is in
use.
• All point-to-point APs
have to have the MAC address of AP 1 (the DGND3700
wireless modem router in the previous figure) in the Remote AP MAC address field.
4. V
erify connectivity across the LANs. A computer on any LAN segment should be able to
conn
ect to the Internet or share files and printers with any other PCs or servers connected to
any of the three LAN segments.
Note: Wireless stations configured as they are in Figure 52 on page 134
will not be able to connect to the wireless modem ro
uter or access
points. If you require wireless stations to access any LAN segment,
you can use additional access points configured in wireless access
point mode in any LAN segment.
Repeater with Wireless Client Association
In the repeater mode with wireless client association, the DGND3700 wireless modem router
sends all traffic to a remote access point. For the repeater mode, you have to enter the MAC
address of the remote “parent” access point. Alternatively, you can configure the DGND3700
wireless modem router as the parent by entering the address of a “child” access point. Note
that the following restrictions apply:
• Y
ou do not have the option of disabling client associations with this DGND37
00 wireless
modem router.
• You cannot configure a sequence of parent-child APs. You are limited to only one parent
access point, althoug
h if the DGND3700 wireless modem router is the parent access
point, it can connect with up to four child APs.