User's Manual

Network Maintenance
70
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Firmware Version. This is the current software the router is using. This will change if you
upgrade your router.
Internet Port. T
hese
are the current settings that you set in the Setup Wizard or Basic
Settings screen.
MAC Addres
s. The
physical address of the router, as seen from the Internet.
IP Address. Current Internet
IP address. If assigned dynamically, and no Internet
connection exists, this is blank or 0.0.0.0.
Network Type
. Indicates either Client (IP address is obtained dynamically) or None.
IP Subnet Mas
k. The subnet mask associated with the Internet IP address.
Domain Name Server. Displays the a
ddress of the current DNS.
LAN Port. These are the current settings, as set in the LAN IP Setup screen.
MAC Address. The
physical address of the router, as seen from the LAN.
IP Address. LAN IP address
of the router.
DHCP. Indicates
if the router is acting as a DHCP server for devices on your LAN.
IP Subnet Mas
k. Subnet mask associated with the LAN IP address.
Modem. The curre
nt modem status and settings are shown in this section.
ADSL Firmware Ve
rsion. This is the version number of the low-level ADSL firmware.
This is contained within the router firmware.
Modem St
atus. The current state of the ADSL connection to your phone company.
DownStream Conne
ction Speed. The connection speed of the ADSL connection from
the phone company to your router.
UpStream Connection Speed. Th
e connection speed of the ADSL connection from your
router to the phone company.
VPI. The VPI sett
ing entered on the ADSL Settings screen.
VCI. The VCI
setting entered on the ADSL Settings screen.
Wireless Port. These
are the current settings, as set in the Wireless Settings screen.
Name (SSID).
SSID of the router.
Region. The location (country).
Channel. The
current channel in use.
Wireless AP. In
dicates if the access point feature of the router is enabled or not. If not
enabled, the Wireless LED on the front panel is off.
Broadcast Name
. Indicates if the router is broadcasting its SSID.
To see router performance statistics such as the number of packets sent and number of
packet
s received for each port, click Show Statistics.
To see information about your current connection, click Connectio
n S
tatus.