Owner's Manual

NETGEAR genie Advanced Home

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B

• To use the push button method, either click the WPS button on this screen, or press

the WPS button on the front of the modem router. Within 2 minutes, go to the wireless

client and press its WPS button to join the network without entering a password.

• To use the PIN method, select the PIN Number radio button, enter the client security

PIN, and click Next.

Within 2 minutes, go to the client device and use its WPS software to join the network

without entering a password.

The modem router attempts to add the WPS-capable device. The WPS LED on the

front of the modem router blinks green. When the modem router establishes a WPS

connection, the LED is solid green, and the modem router WPS screen displays a

confirmation message.

ADSL Setup

The ADSL Settings screen lets you configure the multiplexing method and the virtual circuit

number for the virtual path identifier (VPI) and virtual channel identifier (VCI) of your ADSL

connection. The default parameters should be correct to match the system used by your ISP.

 To enter a multiplexing method or VPI/VCI number (if provided by the ISP):

1. Select ADVANCED > Setup > ADSL Setup.