Operation Manual

Digital Entertainer Elite EVA9000/9150 User Manual
6-2 Custom Setup and Supervisor Functions
v1.0, March 2009
Supervisor Functions Menu Screen
To go to the Supervisor Functions screen, press Home, and select More > Supervisor
functions. The Supervisor Functions menu screen offers these options:
• Setup wizard. Enter or change the settings for the Digital Entertainer Elite.
• Advanced settings. See “Advanced Settings” on page 6-3.
• Full scan for media files. Rebuild the media library. This replaces current media files and
adds newfound media files. A full scan takes significant time, depending on the number of
folders you have designated for sharing.
• Scan for USB attached media. Check for media stored on devices such as an iPod or MP3
player that are connected to the Digital Entertainer Elite.
• Scan for hard drive media. Check for media stored on an internal hard drive device installed
in the Digital Entertainer Elite.
• Hard Drive Tools. Format the drive or verify the health of the drive. See “Hard Drive Tools”
on page 6-3.
• Network test. Measure the data transfer rate between devices on your network and your
Digital Entertainer Elite.
• Update. Check for firmware updates for the Digital Entertainer Elite on the NETGEAR
website, or update the firmware from a file on a USB storage device. See “Updating the
Firmware” on page 7-1 for more information.
• System Information. See “System Information” on page 6-9.
• Restart. Restart the Digital Entertainer Elite.
Warning: Be sure that power to your Digital Entertainer Elite unit is not interrupted
during the firmware update process. Failure to observe this precaution can
permanently damage the unit.
Note: Following a firmware update, you may need to reload your media library into
the Digital Entertainer Elite from the backup location.