Owner's Manual
Table Of Contents
- User Manual
- Contents
- 1. Get to Know Your Extender
- 2. Get Started
- 3. Extender Network Settings
- View Connected Devices
- Boost Your Video Streaming With FastLane Technology
- View WiFi Settings
- Change the WiFi Network Name
- Turn Off the SSID Broadcast to Create a Hidden Network
- Disable or Enable the WiFi Radios
- Change the WiFi Speed
- Use WPS to Add a Computer to the Extender’s WiFi Network
- Deny Access to a WiFi Device
- Set Up an Access Schedule
- Change the Extender’s Device Name
- Set Up the Extender to Use a Static IP Address
- Use the Extender With MAC Filtering or Access Control
- 4. Monitor and Maintain the Extender
- Change the Extender User Name and Password
- Turn Password Protection Off and On
- Recover a Forgotten User Name or Password
- Automatically Adjust for Daylight Saving Time
- Manually Set the Extender Clock
- Back Up and Restore the Extender Configuration
- Return the Extender to Its Factory Settings
- Update the Firmware
- Restart the Extender Remotely
- 5. FAQs and Troubleshooting
- A. Supplemental Information
- Quick Start
19
. Reconnect
your
WiFi-enabled
device
to
the
new extender
WiFi
network
.
20
.
Test
the
new extended
WiFi
range by moving
your
WiFi-enabled
device
to
the
area
with
a poor router WiFi
signal:
a.
Leave
your
WiFi-enabled
device
in
the
area
with
a poor router
WiFi
signal
and return
to
the
extender.
b. Check
the
Client
Link
LED
(<
>)
on
the
extender:
If
the
Client
Link
LED
is
solid
green
or
amber,
your
new
extender
WiFi
network
reaches
the
area
with
a poor router
WiFi
signal
and
your
network
setup
is
complete.
If
the
Client
Link
LED
is
red,
your
new extender WiFi
network
does
not
reach
the
area
with
a poor router
WiFi
signal.
You
must move
your
WiFi-enabled
device
closer
to
the
extender
until
the
Client
Link
LED
turns
solid
green
or
amber.
Connect
an
Ethernet-
Enabled
Device
After
the
extender
is
connected
to
your
existing WiFi network, you can
connect a wired device
to
the
extender using
an
Ethernet
cable.
That
device
can
then access
your
existing
network
through
the
WiFi connection.
Rout
er
12