Quick Reference Guide

Reference Guide for the Model FR314, FR318 and FV318 Cable/DSL Firewall and VPN Routers
Virtual Private Networking 10-13
1. In the Network Security Policy list on the left side of the Security Policy Editor window, click
on My Identity.
2. In the Select Certificate menu, choose None.
3. In the ID Type menu, select Domain Name.
4. In the field below the ID Type menu, enter the name of the Security Association. Note that this
field is case sensitive and must exactly match the SA Name entry that you configured in the
router.
5. If you are using a “virtual fixed” IP address, enter this address in the Internal Network IP
Address box. Otherwise, leave this box empty.
The “virtual fixed” IP address is discussed in “Configuring a Security Association”onpage
10-7, under Destination Network Address. If you are following Netgear’s recommendation,
this address will be in the range of 172.16.0.x.
6. In the Internet Interface box, select the adapter you use to access the Internet. Select PPP
Adapter in the Name menu if you have a dial-up Internet account. Select your Ethernet adapter
if you have dedicated Cable, ISDN or DSL line. You may also choose Any if you will be
switching between adapters.
7. Click the Pre-Shared Key button.
8. In the Pre-Shared Key dialog box, click the Enter Key button.