User's Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
4-4 Virtual Private Networking
Procedure 4-1: Configuring a Network to Network VPN Tunnel
Follow this procedure to configure a VPN tunnel between two LANs via a FVS318 at each end.
Figure 4-2: LAN to LAN VPN access through an FVS318 to an FVS318
1. Set up the two LANs to have different IP address ranges.
The procedures below refer to the “Sample Network to Network IKE VPN Tunnel
Configuration Worksheet” on page 4-3.
To configure your actual network, print and fill out the blank “Network to Network IKE VPN
Tunnel Configuration Worksheet” on page 4-26 for your network configuration. Then follow
the procedures below.
a. Log in to the first FVS318 firewall (A) at its default LAN address of http://192.168.0.1
with its default User Name of
admin and default Password of password, or using
whatever User Name, Password you have set up.
Figure 4-3: Log in
A
B
FVM318.book Page 4 Wednesday, September 18, 2002 5:20 PM