User's Manual
Table Of Contents
- ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- Contents
- 1. Introduction
- 2. Overview of the Configuration Commands
- 3. Net Mode Configuration Commands
- 4. Security Mode Configuration Commands
- Security Services Commands
- Security Schedules Commands
- IPv4 Add Firewall Rule and Edit Firewall Rule Commands
- IPv4 General Firewall Commands
- IPv6 Firewall Commands
- Attack Check Commands
- Session Limit, Time-Out, and Advanced Commands
- Address Filter and IP/MAC Binding Commands
- Port Triggering Commands
- UPnP Command
- Bandwidth Profile Commands
- Content Filtering Commands
- 5. System Mode Configuration Commands
- 6. Dot11 Mode Configuration Commands
- 7. VPN Mode Configuration Commands
- IPSec VPN Wizard Command
- IPSec IKE Policy Commands
- IPSec VPN Policy Commands
- IPSec VPN Mode Config Commands
- SSL VPN Portal Layout Commands
- SSL VPN Authentication Domain Commands
- SSL VPN Authentication Group Commands
- SSL VPN User Commands
- SSL VPN Port Forwarding Commands
- SSL VPN Client Commands
- SSL VPN Resource Commands
- SSL VPN Policy Commands
- RADIUS Server Command
- L2TP Server Commands
- 8. Overview of the Show Commands
- 9. Show Commands
- 10. Utility Commands
- CLI Command Index
Utility Commands
293
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
util ping_through_vpn_tunnel
This command pings a VPN endpoint IP address with 56 data bytes through a VPN tunnel
and displays the ping information.
FVS318N>
util ping_through_vpn_tunnel 10.136.24.128
Pinging 192.168.1.1 from 5
Ping passed
64 bytes from 10.136.24.128: icmp_seq=0 ttl=64
64 bytes from 10.136.24.128: icmp_seq=1 ttl=64
64 bytes from 10.136.24.128: icmp_seq=2 ttl=64
64 bytes from 10.136.24.128: icmp_seq=3 ttl=64
64 bytes from 10.136.24.128: icmp_seq=4 ttl=64
util traceroute
This command traces a route to an IP address.
FVS318N>
util traceroute 10.136.24.128
traceroute to 10.136.24.128 (10.136.24.128), 30 hops max, 40 byte packets|
1 (10.136.24.128) 0.516 ms 0.227 ms 0.218 ms
util routing_table_ipv4
This command displays the IPv4 routing table.
util routing_table_ipv6
This command displays the IPv6 routing table.
Format util ping_through_vpn_tunnel <ipaddress>
Mode util
Format util traceroute <ipaddress>
Mode util
Format util routing_table_ipv4
Mode util
Format util routing_table_ipv6
Mode util