Quick Reference Guide

Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
G-10 NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVL328
M-10146-01
Figure G-9: NETGEAR FVL328 VPN v1.4 – Auto Policy (part 2)
– From the Traffic Selector Remote IP drop-down box, select “Subnet addresses”.
– Type the starting LAN IP Address of Gateway A (10.5.6.1 in our example) in the Remote
IP Start IP Address field.
– Type the LAN Subnet Mask of Gateway A (255.255.255.0 in our example) in the Remote
IP Subnet Mask field.
– Select Enable Encryption in the ESP Configuration Enable Encryption checkbox.
– From the ESP Configuration Encryption Algorithm drop-down box, select 3DES.
– Select Enable Authentication in the ESP Configuration Enable Authentication checkbox.
– From the ESP Configuration Authentication Algorithm drop-down box, select MD5.
– Select NETBIOS Enable in the NETBIOS Enable checkbox to enable networking features
like Windows Network Neighborhood.
5. Click the Apply Button. You will be taken back to the VPN Policies Menu page.