Quick Reference Guide

ProSafe VPN Firewall 200 FVX538 Reference Manual
LAN Configuration 3-17
v1.0, January 2010
2. Click RIP Configuration link to the right of the Routing tab. The RIP Configuration screen
will display.
3. From the RIP Direction pull-down menu, select the direction in which the VPN firewall will
send and receives RIP packets. The choices are:
• None. The VPN firewall neither broadcasts its route table nor does it accept any RIP
packets from other routers. This effectively disables RIP.
• Both. The VPN firewall broadcasts its routing table and also processes RIP information
received from other routers.
• Out Only. The VPN firewall broadcasts its routing table periodically but does not accept
RIP information from other routers.
• In Only. The VPN firewall accepts RIP information from other routers, but does not
broadcast its routing table.
4. From the RIP Version pull-down menu, select the version:
• Disabled. The default section disables RIP versions.
• RIP-1. A class-based routing that does not include subnet information. This is the most
commonly supported version.
Figure 3-8