User's Manual Part 1
Table Of Contents
- Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
- Contents
- Chapter 1 About This Manual
- Chapter 2 Introduction
- Chapter 3 Connecting the FWG114P to the Internet
- Chapter 4 Wireless Configuration
- Chapter 5 Serial Port Configuration
- Chapter 6 Firewall Protection and Content Filtering
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
4-12 Wireless Configuration
March 2004, 202-10027-01
How to Configure WPA
Note: Not all wireless adapters support WPA. Furthermore, client software is required on the
client. Windows XP and Windows 2000 with Service Pack 3 do include the client software that
supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.
Consult the product document for your wireless adapter and WPA client software for instructions
on configuring WPA settings.
To configure WPA, follow these steps:
1. Log in at the default LAN address of http://192.168.0.1 with the default user name of admin
and default password of password, or using whatever LAN address and password you have
set up.
2. Click Wireless Settings in the Setup section of the main menu of the FWG114P.
Figure 4-4: Wireless Settings menu
3.
Choose the WPA radio button. The WPA menu will open.
4. Enter the Radius settings.
5. Click Apply to save your settings.