JGS524PE Quick Installation Guide

Installation Guide

ProSAFE Plus 24-Port Gigabit Switch with PoE JGS524PE

ProSAFE Plus 16-Port Gigabit Switch with PoE JGS516PE

Step 2. Connect power

Step 3. Check status

Off

Power LED

Activity (blinking)

No link (off)

1000 Mbps

Port Link Speed/ACT LED

10/100 Mbps

Step 1. Connect equipment

Fan LED

Fan Failure

Normal Operation

At least 7W

of Power Available

PoE Max LED

Less than 7W

Power Available

PoE Max LED

Active in past

two minutes

PoE Status LED

PoE Powered

PoE Fault

No PoE Device

Connected

JGS524PE

Internet

Computer Server

Optional wireless access point

PAGE 1
Installation Guide ProSAFE Plus 24-Port Gigabit Switch with PoE JGS524PE ProSAFE Plus 16-Port Gigabit Switch with PoE JGS516PE Step 3. Check status Step 1. Connect equipment Computer Server Step 2.
PAGE 2
Set up the Switch Configuration Utility Specifications Plus switches are plug and play.You can install a configuration utility to select additional options to manage and customize the switch for your network. This utility is on the resource CD that was shipped with the switch. Specification Description Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T Note: The configuration utility is installed on your computer and is only supported on Windows.