User Manual

Manage and Monitor the Switch
58
ProSAFE Gigabit Web Managed (Plus) Switches
• 10M Half. The port is forced to function at 10 Mbps with half duplex.
• 10M Full. The port is forced to function at 10 Mbps with full duplex.
• 100M Half. The port is forced to function at 100 Mbps with half duplex.
• 100M Full. The port is forced to function at 100 Mbps with full duplex.
8. To configure more ports, repeat Step 6 and Step 7.
9. Click the Apply button.
Your settings are saved.
Use the ProSAFE Plus Utility to Specify the Port Speed or Shut
Down a Port
 To specify the port speed or shut down a port:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.