User manual

Chapter 1: Getting Started | 21
GS108T and GS110TP Smart Switch Software Administration Manual
Firmware Upgrade
The application software for the GS108T and GS110TP Smart Switches is upgradeable,
enabling your switch to take advantage of improvements and additional features as they
become available. The upgrade procedure and the required equipment are described in this
section. This procedure assumes that you have downloaded or otherwise obtained the
firmware upgrade and that you have it available as a binary file on your computer. This
procedure uses the TFTP protocol to implement the transfer from computer to switch.
Note: You can also upgrade the firmware using the TFTP Download and
HTTP Download features mentioned in this book. See Download
File To Switch on page 223.
To upgrade your firmware:
1. Click the Maintenance tab, and then click the Firmware link directly below the tabs
(see Figure 1 on page 12).
2. Select the switch to upgrade and click Download Firmware.
3. From the Select new firmware window that appears, navigate to and select the firmware
image to download to the switch.
4. Click Open.