User manual

Chapter 6: Monitoring the System | 217
GS108T and GS110TP Smart Switch Software Administration Manual
3. From the Session Mode menu, select the mode for port mirroring on the selected port:
• Enable. Multiple Port Mirroring is active on the selected port.
• Disable. Port mirroring is not active on the selected port, but the mirroring information
is retained.
4. Click Apply to apply the settings to the system. If the port is configured as a source port, the
Mirroring Port field value is Mirrored.
5. To delete a mirrored port, select the check box next to the mirrored port, and then click
Delete.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.