User manual

Chapter 2: Configuring System Information | 33
GS108T and GS110TP Smart Switch Software Administration Manual
Management
This section describes how to display the switch status and specify some basic switch
information, such as the management interface IP address, system clock settings, and DNS
information. From the Management link, you can access the following pages:
• System Information on page 33
• IP Configuration on page 34
• Time on page 36
• Denial of Service on page 42
• DNS on page 44
• Green Ethernet Configuration on page 47
System Information
After a successful login, the System Information page displays. Use this page to configure
and view general device information.
To display the System Information page, click System  Management System Information.
A screen similar to the following displays.
To define system information:
1. Open the System Information page.
2. Define the following fields:
• System Name. Enter the name you want to use to identify this switch. You may use
up to 31 alphanumeric characters. The factory default is blank.