User manual

Chapter 1: Getting Started | 8
1. Getting Started
1
The NETGEAR
®
GS108T and GS110TP Smart Switch Software Administration Manual
describes how to configure and operate the GS108T and GS110TP Gigabit Smart Switches by
using the Web-based graphical user interface (GUI). This manual describes the software
configuration procedures and explains the options available within those procedures.
Document Organization
The GS108T and GS110TP Smart Switch Software Administration Manual contains the
following chapters:
• Chapter 1, Getting Started, contains information about performing the initial system
configuration and accessing the user interface.
• Chapter 2, Configuring System Information, describes how to configure administrative
features such as SNMP, DHCP, and port information.
• Chapter 3, Configuring Switching Information, describes how to manage and monitor the
layer 2 switching features.
• Chapter 4, Configuring Quality of Service, describes how to manage the Access Control
Lists (ACLs), and how to configure Differentiated Services and Class of Service features.
• Chapter 5, Managing Device Security, contains information about configuring switch
security information such as port access control and RADIUS server settings.
• Chapter 6, Monitoring the System, describes how to view a variety of information about
the switch and its ports, and to configure how the switch monitors events.
• Chapter 7, Maintaining the System, describes features to help you manage the switch.
• Chapter 8, Accessing Help
, describes how to access Online Help resources for the switch.
• Appendix A, Hardware Specifications and Default Values, contains hardware
specifications and default values on the GS108T and GS110TP Smart Switches.
• Appendix B, Configuration Examples, contains examples of how to configure various
features on the GS108T and GS110TP Smart Switches, such as VLANs and ACLs.
Note: Refer to the release notes for the GS108T and GS110TP Gigabit
Smart Switches for information about issues and workarounds.