User manual

26 | Chapter 3: Configuring Switching Information
GS108T and GS110TP Smart Switch Software Administration Manual
Auto-VoIP
The Auto-VoIP automatically makes sure that time-sensitive voice traffic is given priority over
data traffic on ports that have this feature enabled. Auto-VoIP checks for packets carrying the
following VoIP protocols:
• Session Initiation Protocol (SIP)
• H.323
• Signalling Connection Control Part (SCCP)
• Media Gateway Control Protocol (MGCP)
VoIP frames that are received on ports that have the Auto-VoIP feature enabled are marked
with CoS traffic class 3.
To display the Auto-VoIP page, click Switching Auto-VoIP.
To configure Auto-VoIP settings:
1. Select the check box next to the port to configure. You can select multiple check boxes
to apply the same setting to all selected ports.
2. From the Auto-VoIP Mode menu, specify whether to enable or disable Auto-VoIP on the
selected port.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
4. If you make any changes to this page, click Apply to send the updated configuration to the
switch.