Manualshelf

Quick Reference Guide

ManualsBrandsNetgear ManualsHubsNetgear GS108Tv2
141142143144145146147148149150
GS108T and GS110TP Smart Switch Software Administration Manual
4-4 Configuring Quality of Service
v1.0, April 2010
CoS Interface Configuration
Use the CoS Interface Configuration page to apply an interface shaping rate to all interfaces or to a
specific interface.
To display the CoS Interface Configuration page, click the QoS CoS tab, and then click the
Advanced CoS Interface Configuration link.
To configure CoS settings for an interface:
1. To configure CoS settings for a physical port, click PORTS.
2. To configure CoS settings for a Link Aggregation Group (LAG), click LAGS.
3. To configure CoS settings for both physical ports and LAGs, click ALL.
4. Select the check box next to the port or LAG to configure. You can select multiple ports and
LAGs to apply the same setting to the selected interfaces.
Figure 4-2