Quick Reference Guide

GS108T and GS110TP Smart Switch Software Administration Manual
Configuring Quality of Service 4-7
v1.0, April 2010
• Scheduler Type. Selects the type of queue processing from the drop down menu. Options
are Weighted and Strict. Defining on a per-queue basis allows the user to create the desired
service characteristics for different types of traffic.
• Weighted: Weighted round robin associates a weight to each queue. This is the
default.
• Strict: Services traffic with the highest priority on a queue first.
• Queue Management Type. Displays the type of packet management used for all packets,
which is Taildrop. All packets on a queue are safe until congestion occurs. At this point,
any additional packets queued are dropped.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
7. If you make changes to the page, click Apply to apply the changes to the system.
802.1p to Queue Mapping
The 802.1p to Queue Mapping page also displays the Current 802.1p Priority Mapping table. To
display the 801.p to Queue Mapping page, click QoS  CoS  Advanced  802.1p to Queue
Mapping.
Figure 4-4