Quick Reference Guide

GS108T and GS110TP Smart Switch Software Administration Manual
Managing Device Security 5-19
v1.0, April 2010
• SSL DH Weak Encryption Parameter PEM File. SSL Diffie-Hellman Weak Encryption
Parameter File (PEM Encoded).
• SSL DH Strong Encryption Parameter PEM File. SSL Diffie-Hellman Strong
Encryption Parameter File (PEM Encoded).
2. In the TFTP Server IP field, specify the address of the TFTP server. The address can be an IP
address in standard x.x.x.x format or a hostname. The hostname must start with a letter of the
alphabet. Make sure that the software image or other file to be downloaded is available on the
TFTP server.
3. In the Remote File Name field, specify the name of the file to download, including the path.
You may enter up to 32 characters.
4. Select the Start File Transfer check box.
5. Click Apply to start the transfer. A status message displays during the transfer and upon
successful completion of the transfer.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
Access Profile Configuration
Use the Access Profile Configuration page to configure settings that control management access to
the switch. Access profile configuration requires three steps:
1. Use the Access Profile Configuration page to create an access profile. To add rules to the
profile, the access profile must be deactivated, which is the default setting.
2. Use the Access Rule Configuration page to add one or more access rules to the profile.
3. Return to the Access Profile Configuration page to activate the profile.
To access the Access Profile Configuration page, click Security  Access, and then click the
Access Control  Access Profile Configuration link.