Quick Reference Guide

GS108T and GS110TP Smart Switch Software Administration Manual
Managing Device Security 5-41
v1.0, April 2010
The Dynamic MAC Address Table shows the MAC addresses and their associated VLANs learned
on the selected port. Use the Port List menu to select the interface for which you want to display
data.
Click Refresh to refresh the page with the most current data from the switch.
Protected Ports Membership
If a port is configured as protected, it does not forward traffic to any other protected port on the
switch, but it will forward traffic to unprotected ports. Use the Protected Ports Membership page to
configure the ports as protected or unprotected.
To display the Protected Ports Membership page, click the Security  Traffic Control 
Protected Ports link.
To configure protected ports:
1. Click the orange bar to display the available ports.
Table 5-7. Dynamic MAC Address Table Fields
Field Description
VLAN ID Displays the VLAN ID corresponding to the Last Violation MAC address.
MAC Address Displays the MAC addresses learned on a specific port.
Figure 5-24