Quick Reference Guide

GS108T and GS110TP Smart Switch Software Administration Manual
7-12 Maintenance
v1.0, April 2010
The following table describes the information on the Dual Image Status page.
Click Refresh to display the latest information from the switch.
For information about how to update or change the system images, see “File Management” on
page 7-9.
Troubleshooting
The Troubleshooting menu contains links to the following options:
• “Ping” on page 7-12
• “Traceroute” on page 7-14
Ping
Use the Ping page to tell the switch to send a Ping request to a specified IP address. You can use
this feature to check whether the switch can communicate with a particular network host.
To access the Ping page, click Maintenance  Troubleshooting  Ping.
Table 7-1. Dual Image Status Fields
Field Description
Unit The unit ID of the switch is always 1.
Image1 Ver Displays the version of the image1 code file.
Image2 Ver Displays the version of the image2 code file.
Current-active Displays the currently active image on this switch.
Next-active Displays the image to be used on the next restart of this switch.
Image1 Description Displays the description associated with the image1 code file.
Image2 Description Displays the description associated with the image2 code file.