Quick Reference Guide

GS108T and GS110TP Smart Switch Software Administration Manual
A-2 Hardware Specifications and Default Values
v1.0, April 2010
GS108T and GS110TP Switch Features and Defaults
Table A-3. GS108T and GS110TP Switch Performance
Feature Value
Switching capacity Non-Blocking Full WireSpeed on all packet sizes
Forwarding method Store and Forward
Packet forwarding rate 10M:14,880 pps/
100M:148,810 pps/
1G:1,488,000 pps
MAC addresses 4K
Green Ethernet Power consumption savings by cable length (<10m)
Automatic power down on port when link is down (GS110TP only)
Table A-4. Port Characteristics
Feature Sets Supported Default
Auto negotiation/static speed/
duplex
All ports Auto negotiation
Auto MDI/MDIX N/A Enabled
802.3x flow control/back pressure 1 (per system) Disabled
Port mirroring 1 Disabled
Port trunking (aggregation) 4 Pre-configured
802.1D spanning tree 1 Disabled
802.1w RSTP 1 Disabled
802.1s spanning tree 3 instances Disabled
Static 802.1Q tagging 64 VID = 1
Member ports = 8 (GS108T)
Member ports = 10 (GS110TP)
Learning process Supports Static and dynamic MAC
entries
Dynamic learning is enabled by
default
PoE (GS110TP only) 8 Enabled