Quick Reference Guide

GS108T and GS110TP Smart Switch Software Administration Manual
Configuring System Information 2-17
v1.0, April 2010
2. Specify the IP address in standard IPv4 dot notation to associate with the hostname.
3. Click Add. The entry appears in the list below.
4. To remove an entry from the static DNS table, select the check box next to the entry and click
Delete.
5. To change the hostname or IP address in an entry, select the check box next to the entry and
enter the new information in the appropriate field, and then click Apply.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
The Dynamic Host Configuration table shows host name-to-IP address entries that the switch has
learned. The following table describes the dynamic host fields:
Click Refresh to refresh the table with the most current data from the switch.
Click Clear to delete Dynamic Host Entries. The table will be repopulated with entries as they are
learned.
Green Ethernet Configuration
Use this page to configure Green Ethernet features. Using the Green Ethernet features allows for
power consumption savings.
To access this page, click System  Management  Green Ethernet Configuration.
Table 2-4. Dynamic Host Status Fields
Field Description
Host Lists the host name you assign to the specified IP address.
Total Amount of time since the dynamic entry was first added to the table.
Elapsed Amount of time since the dynamic entry was last updated.
Type The type of the dynamic entry.
Addresses Lists the IP address associated with the host name.