Quick Reference Guide

GS108T and GS110TP Smart Switch Software Administration Manual
Configuring System Information 2-23
v1.0, April 2010
3. Assign the timer to the port or LAG on the PoE Port Configuration page.
To display the Timer Global Configuration page, click System  PoE  Advanced  Timer
Global Configuration.
To configure global timer settings:
1. To add a timer, enter a name in the Timer Schedule Name field, and click Add.
2. To remove a timer, select the check box associated with the timer and click Delete.
3. To enable or disable the timer feature, select the appropriate radio button and click Apply.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
Timer Schedule Configuration
Use the Timer Schedule Configuration page to configure when the power to a port is turned off.
For example, you can specify that the power is turned off every night, during the weekend, or
during the same one-week period every year.
Note: The Timer Schedule feature must be enabled for the settings to be applied to the
ports.
Figure 2-12