Quick Reference Guide

GS108T and GS110TP Smart Switch Software Administration Manual
2-36 Configuring System Information
v1.0, April 2010
Click Refresh to refresh the page with the most current data from the switch.
LLDP-MED Port Settings
Use this page to enable LLDP-MED mode on an interface and configure its properties.
To display this page, click System  LLDP  Advanced  LLDP-MED Port Settings.
To configure LLDP-MED settings for a port:
1. From the Port field, select the port to configure.
2. From the LLDP-MED Status field, enable or disable the LLDP-MED mode for the selected
interface.
VLAN Type Specifies whether the VLAN associated with the policy is tagged or
untagged.
User Priority Specifies the priority associated with the policy.
DSCP Specifies the DSCP associated with a particular policy type.
Figure 2-21
Table 2-6. LLPD-MED Network Policy Information Fields (continued)
Field Description