Quick Reference Guide

GS108T and GS110TP Smart Switch Software Administration Manual
3-8 Configuring Switching Information
v1.0, April 2010
2. In the LAG Name field, enter the name you want assigned to the LAG. You may enter any
string of up to 15 alphanumeric characters. A valid name has to be specified to create the LAG.
3. Click the orange bar to display the ports.
4. Click the box below each port to include in the LAG. Figure 3-5 shows an example of how to
configure LAG1 with ports g7 and g8 as members.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
6. If you make any changes to this page, click Apply to send the updated configuration to the
switch. Configuration changes take effect immediately.
7. To view the ports that are members of the selected LAG, click Current Members.
LACP Configuration
To display the LACP Configuration page, click Switching LAG  Advanced  LACP
Configuration.
Figure 3-5
Figure 3-6