Quick Reference Guide

GS108T and GS110TP Smart Switch Software Administration Manual
1-4 Getting Started
v1.0, April 2010
6. Make a note of the displayed IP address assigned by the DHCP server. You will need this
value to access the switch directly from a Web browser (without using the Smart Control
Center).
7. Select your switch by clicking the line that displays the switch, then click the
Web Browser Access button. The Smart Control Center displays a login window similar to
Figure 1-3.
Use your Web browser to manage your switch. The default password is password. Then use
this page to proceed to management of the switch covered in “Using the Web Interface” on
page 1-15.
Figure 1-2
Figure 1-3