Quick Reference Guide

GS108T and GS110TP Smart Switch Software Administration Manual
Configuring System Information 2-19
v1.0, April 2010
• “Timer Global Configuration” on page 2-22
• “Timer Schedule Configuration” on page 2-23
PoE Configuration
Use the PoE Configuration page to view global PoE power information and to configure PoE
SNMP trap settings.
To display the PoE Configuration page, click System  PoE  Basic  PoE Configuration.
To configure PoE trap settings:
1. Select the appropriate radio button to enable or disable SNMP traps.
2. Click Apply to apply the new settings to the system.
Note: You can also access the PoE Configuration page by clicking System  PoE 
Advanced  PoE Configuration.
Figure 2-10