Quick Reference Guide

GS108T and GS110TP Smart Switch Software Administration Manual
2-20 Configuring System Information
v1.0, April 2010
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. Click Refresh to update the screen with the current information.
The PoE Configuration page also provides the following information:
PoE Port Configuration
Use the PoE Port Configuration page to configure per-port PoE settings.
To display the PoE Port Configuration page, click System  PoE  Advanced  PoE Port
Configuration.
Table 2-5. Global PoE Status Information Fields
Field Description
Power Status Indicates whether the PoE capability is on or off.
Nominal Power Indicates the nominal amount of power the switch can provide to all ports.
Threshold Power Shows the amount of power the system can consume before the system will
not provide power to an additional port.
Consumed Power Shows the total amount of power currently being delivered to all ports.
Figure 2-11