6-port Gigabit Switch 10/100/1000 Mbps GS116 Installation Guide
Introduction The NETGEAR® 16-port Gigabit Switch Model GS116 provides you with a low-cost, reliable, high-performance switch to connect up to sixteen different Ethernet-enabled devices (such as computers, file servers and routers) at blazing Gigabit Ethernet speeds.
Make sure the selected location is: Power • Not in direct sunlight or near a heater or heating vent. • Not cluttered or crowded. There should be at least 2 inches (5 cm) of clear space on all sides of the switch. • On=Link Both=1000M Blink=Act 100M 10M 10/100/1000 Mbps Gigabit Switch GS116 Auto Uplink PWR 1 Well ventilated (especially if it is in a closet).
Technical Specifications Standards Compatibility: Network Interface: Power: Physical Dimensions: Weight: Operating Temperature: Operating Humidity: Electromagnetic Compliance: Safety Agency Approvals for the Power Adapter: IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, 1000BASE-T Gigabit Ethernet IEEE 802.3x Flow Control, IEEE 802.
Technical Support PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH YOUR PRODUCT. By registering your product at www.NETGEAR.com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades. ©2004 NETGEAR, Inc. NETGEAR, the Netgear logo, ProSafe, Auto Uplink and Everybody's connecting are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries.
