Owner's Manual
Table Of Contents
- User Manual
- Contents
- 1. Hardware
- 2. Get Started
- 3. Use VLANS for Traffic Segmentation
- 4. Optimize Performance With Quality of Service
- 5. Manage Network Settings
- 6. Manage and Monitor the Switch
- Manage Flow Control
- Manage the Port Speed and the Port Status
- Enable Loop Detection
- Manage Power Saving Options
- Download and Update the Firmware
- Reboot the Switch
- Save the Switch Configuration
- Restore a Saved Switch Configuration
- Restore Factory Default Settings
- Manage Access Control
- Enable Port Mirroring
- View Switch Information or Change the Switch Device Name
- View or Clear the Port Statistics
- PoE Considerations for Switches That Support PoE
- 7. Diagnostics and Troubleshooting
- A. Factory Default Settings and Technical Specifications
- Factory Default Settings
- Technical Specifications
- Model GS105Ev2 Technical Specifications
- Model GS105PE Technical Specifications
- Model GS108Ev3 Technical Specifications
- Model GS108PEv3Technical Specifications
- Model GS116Ev2 Technical Specifications
- Model GS305E Technical Specifications
- Model GS308E Technical Specifications
- Models JGS516PE and JGS524PE Technical Specifications
- Model JGS524Ev2 Technical Specifications
- Installation Guide
- Smart Managed Plus Gigabit Ethernet Switches
(Continued)
CommentsPublish DatePublication Part
Number
•
Changed the manual name from ProSAFE Gigabit Web Managed (Plus)
Switches User Manual to Gigabit Ethernet Smart Managed Plus Switches User
Manual.
•
Added Safety Instructions and Warnings on page 12.
•
Revised Configure the Switch on page 16.
•
Revised Access a Switch That Is Connected to a Network on page 17.
•
Revised Install the ProSAFE Plus Utility on page 19.
•
Added Use the NETGEAR Switch Discovery Tool to Access the Switch on page
21.
•
Added Use the NETGEAR Insight Mobile App to Discover the Switch on page
22.
•
Added Change the Language on page 23, including Change the Language
of the Local Browser Interface on page 24 and Change the Language for the
Local Browser Interface by Installing Another Firmware Version on page 24.
•
Added Manage Access Control on page 64 including Add Devices to the
Access Control Table on page 64 and Remove Devices From the Access
Control Table on page 65.
•
Added PoE Considerations for Switches That Support PoE on page 69.
•
Added PoE Troubleshooting Suggestions on page 73.
•
Removed references to the resource CD.
•
Made multiple minor changes.
October 2018202-11700-03
Made corrections to Specify a Port PVID for an 802.1Q-Based VLAN on page
36.
March 2017202-11700-02
First publication.August 2016202-11700-01
3
Gigabit Ethernet Smart Managed Plus Switches