Owner's Manual
Table Of Contents
- User Manual
- Contents
- 1. Hardware
- 2. Get Started
- 3. Use VLANS for Traffic Segmentation
- 4. Optimize Performance With Quality of Service
- 5. Manage Network Settings
- 6. Manage and Monitor the Switch
- Manage Flow Control
- Manage the Port Speed and the Port Status
- Enable Loop Detection
- Manage Power Saving Options
- Download and Update the Firmware
- Reboot the Switch
- Save the Switch Configuration
- Restore a Saved Switch Configuration
- Restore Factory Default Settings
- Manage Access Control
- Enable Port Mirroring
- View Switch Information or Change the Switch Device Name
- View or Clear the Port Statistics
- PoE Considerations for Switches That Support PoE
- 7. Diagnostics and Troubleshooting
- A. Factory Default Settings and Technical Specifications
- Factory Default Settings
- Technical Specifications
- Model GS105Ev2 Technical Specifications
- Model GS105PE Technical Specifications
- Model GS108Ev3 Technical Specifications
- Model GS108PEv3Technical Specifications
- Model GS116Ev2 Technical Specifications
- Model GS305E Technical Specifications
- Model GS308E Technical Specifications
- Models JGS516PE and JGS524PE Technical Specifications
- Model JGS524Ev2 Technical Specifications
- Installation Guide
- Smart Managed Plus Gigabit Ethernet Switches
Contents
Chapter 1 Hardware
Supported Switch Models...................................................................8
Status LEDs............................................................................................9
Models GS105Ev2, GS108Ev3, GS116Ev2, GS305E, and GS308E
LEDs...................................................................................................9
Model GS105PE LEDs......................................................................9
Models GS108PEv3 LEDs.............................................................10
Model JGS524Ev2 LEDs................................................................11
Models JGS516PE and JGS524PE LEDs.....................................11
Safety Instructions and Warnings.....................................................12
Chapter 2 Get Started
Configure the Switch..........................................................................16
Access the Switch Using a Web Browser.........................................16
Access a Switch That Is Connected to a Network......................17
Access a Switch That Is Off-Network...........................................18
Access the Switch With the ProSAFE Plus Utility............................18
Install the ProSAFE Plus Utility......................................................19
Access and Configure the Switch Using the ProSAFE Plus
Utility................................................................................................19
Use the NETGEAR Switch Discovery Tool to Access the Switch....21
Use the NETGEAR Insight Mobile App to Discover the Switch....22
Change the Switch Password............................................................22
Change the Language.......................................................................23
Change the Language of the Local Browser Interface..............24
Change the Language for the Local Browser Interface by Installing
Another Firmware Version............................................................24
Register Your Product........................................................................26
Chapter 3 Use VLANS for Traffic Segmentation
VLAN Overview...................................................................................28
Create Basic Port-Based VLANs........................................................28
Assign Ports to Multiple Port-Based VLANs....................................30
Create 802.1Q-Based VLANs in a Basic Configuration.................32
Create 802.1Q-Based VLANs in an Advanced Configuration......33
Add Tagged or Untagged Ports to an 802.1Q-Based VLAN........35
4