User's Manual

Specify a Port PVID for an 802.1Q-Based VLAN.............................36
Chapter 4 Optimize Performance With Quality of Service
Enable 802.1p/DSCP-Based Quality of Service..............................39
Configure Port-Based Quality of Service.........................................40
Set Up Rate Limiting...........................................................................41
Set Up Broadcast Filtering.................................................................42
Chapter 5 Manage Network Settings
Specify IP Address Settings for the Switch......................................46
Use Browser-Based Access to Specify the Switch IP Address...46
Use the ProSAFE Plus Utility to Specify the Switch IP Address.47
Manage Multicast Traffic With IGMP Snooping..............................48
Customize IGMP Snooping...........................................................49
Specify a VLAN for IGMP Snooping.............................................50
Set Up Link Aggregation Groups.....................................................51
Chapter 6 Manage and Monitor the Switch
Manage Flow Control........................................................................55
Manage the Port Speed and the Port Status...................................56
Enable Loop Detection......................................................................57
Manage Power Saving Options........................................................58
Download and Update the Firmware..............................................59
Reboot the Switch...............................................................................61
Save the Switch Configuration..........................................................61
Restore a Saved Switch Configuration.............................................62
Restore Factory Default Settings......................................................63
Manage Access Control.....................................................................64
Add Devices to the Access Control Table..................................64
Remove Devices From the Access Control Table......................65
Enable Port Mirroring.........................................................................66
View Switch Information or Change the Switch Device Name.....67
View or Clear the Port Statistics........................................................68
PoE Considerations for Switches That Support PoE......................69
Chapter 7 Diagnostics and Troubleshooting
Test Cable Connections.....................................................................72
Resolve a Subnet Conflict to Access the Switch.............................73
PoE Troubleshooting Suggestions...................................................73
Appendix A Factory Default Settings and Technical Specifications
Factory Default Settings.....................................................................76
Technical Specifications.....................................................................77
Model GS105Ev2 Technical Specifications................................77
5
Gigabit Ethernet Smart Managed Plus Switches