User's Manual
Table Of Contents
- Contents
- 1. Hardware
- 2. Get Started
- 3. Use VLANS for Traffic Segmentation
- 4. Optimize Performance With Quality of Service
- 5. Manage Network Settings
- 6. Manage and Monitor the Switch
- Manage Flow Control
- Manage the Port Speed and the Port Status
- Enable Loop Detection
- Manage Power Saving Options
- Download and Update the Firmware
- Reboot the Switch
- Save the Switch Configuration
- Restore a Saved Switch Configuration
- Restore Factory Default Settings
- Manage Access Control
- Enable Port Mirroring
- View Switch Information or Change the Switch Device Name
- View or Clear the Port Statistics
- PoE Considerations for Switches That Support PoE
- 7. Diagnostics and Troubleshooting
- A. Factory Default Settings and Technical Specifications
- Factory Default Settings
- Technical Specifications
- Model GS105Ev2 Technical Specifications
- Model GS105PE Technical Specifications
- Model GS108Ev3 Technical Specifications
- Model GS108PEv3Technical Specifications
- Model GS116Ev2 Technical Specifications
- Model GS305E Technical Specifications
- Model GS308E Technical Specifications
- Models JGS516PE and JGS524PE Technical Specifications
- Model JGS524Ev2 Technical Specifications
Technical Specifications
This section describes the technical specifications for each switch model.
Model GS105Ev2 Technical Specifications
The following table shows the technical specifications for model GS105Ev2.
Table 10. Model GS105Ev2 technical specifications
DescriptionFeature
RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-TNetwork interface
Category 5e (Cat 5e) or higher-rated Ethernet cableNetwork cable
5Ethernet ports
12V, 1.0A DC inputPower input
2.6W maximumPower consumption
3.7 in. x 3.9 in. x 1.06 in. (94 mm x 100 mm x 27 mm)Dimensions (W x D x H)
0.56 lb (0.252 kg)Weight
32º to 122ºF (0° to 50°C)Operating temperature
10–90% maximum relative humidity, noncondensingOperating humidity
KC Class B, FCC part 15 Class B, C-Tick Class B, CE Class B, VCCI Class B, CCC,
CAN ICES-3 (B)/NMB-3(B)
Electromagnetic
compliance
CE mark, CB, CCCSafety agency approvals
Model GS105PE Technical Specifications
The following table shows the technical specifications for model GS105PE.
Table 11. Model GS105PE technical specifications
DescriptionFeature
RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-TNetwork interface
Category 5e (Cat 5e) or higher-rated Ethernet cableNetwork cable
5Ethernet ports
User Manual77Factory Default Settings and
Technical Specifications
Gigabit Ethernet Smart Managed Plus Switches