Installation Manual

Installation

Step 1. Connect the equipment.

8-Port Gigabit Switch with 4-Port PoE

GS308P

Step 2. Connect to power. Step 3. Check the status.

Power LED Right PoE LEDs (Ports 1–4) Le Port LEDs (Ports 1–8)

On PoE in use 1000 Mbps

link

O PoE fault 10/100 Mbps

link

No PoE use (o)

Activity

(blinking)

No link (o)

PoE Max LED

Less than 7W of PoE power is available.

PoE Max. LED was activated in the previous two minutes

(blinking.

PoE ports are working normally (o).

GS308P Optional router

Optional modem

IP Phone Server

Internet

PAGE 1
Installation 8-Port Gigabit Switch with 4-Port PoE GS308P Step 2. Connect to power. Step 3. Check the status. Power LED Step 1. Connect the equipment. IP Phone Server Right PoE LEDs (Ports 1–4) Left Port LEDs (Ports 1–8) On PoE in use 1000 Mbps link Off PoE fault 10/100 Mbps link Internet No PoE use (off) Optional modem No link (off) PoE Max LED Less than 7W of PoE power is available. PoE Max. LED was activated in the previous two minutes (blinking.
PAGE 2
Specifications Specification Description Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T Network cable Category 5 (Cat 5) or better Ethernet cable Ports 8 Power adapter 48V @ 1.25 A DC input Power consumption 7.0W max. (no PoE) 60W max (with PoE) PoE power budget Ports 1-4: 15.4W maximum per PoE port, up to 53W total PoE power For more information, see PoE Specifications. Weight 0.46 kg (1.02 lb) Dimensions (W x D x H) 158 mm x 101 mm x 29 mm 6.2 in. x 4.0 in. x 1.