User Manual
Table Of Contents
- Contents
- 1. Hardware
- 2. Install and Access the Switch in Your Network
- 3. Optimize the Switch Performance
- 4. Use VLANS for Traffic Segmentation
- 5. Manage the Switch in Your Network
- 6. Maintain and Monitor the Switch
- Manually check for new switch firmware and update the switch
- Manage the configuration file
- Return the switch to its factory default settings
- Control access to the device UI
- Change or lift access restrictions to the switch
- Manage the DoS prevention mode
- Manage the power saving mode
- Control the port LEDs
- Change the switch device name
- View system information
- View switch connections
- View the status of a port
- PoE considerations for switches that support PoE
- Manage the PoE ports
- Display PoE port status
- Power cycle the PoE ports
- 7. Diagnostics and Troubleshooting
- A. Factory Default Settings and Technical Specifications
- B. Additional Switch Discovery and Access Information
Chapter 4 Use VLANS for Traffic Segmentation
VLAN overview....................................................................................33
Activate the Basic Port-Based VLAN mode and assign VLANs.....35
Manage advanced port-based VLANs.............................................36
Activate the Advanced Port-Based VLAN Mode........................36
Create an advanced port-based VLAN.......................................37
Change an advanced port-based VLAN.....................................38
Delete an advanced port-based VLAN.......................................39
Manage basic 802.1Q VLANs...........................................................40
Activate the Basic 802.1Q VLAN mode.......................................40
Create a basic 802.1Q VLAN and assign ports as members....41
Assign the port mode in a basic 802.1Q VLAN configuration..43
Change a basic 802.1Q VLAN......................................................44
Delete a basic 802.1Q VLAN........................................................45
Manage advanced 802.1Q VLANs...................................................46
Activate the advanced 802.1Q VLAN mode..............................47
Create an advanced 802.1Q VLAN.............................................48
Change an advanced 802.1Q VLAN...........................................49
Specify a port PVID for an advanced 802.1Q VLAN..................50
Set an existing advanced 802.1Q VLAN as the voice VLAN and
adjust the CoS value......................................................................52
Change the OUI table for the voice VLAN..................................53
Delete an advanced 802.1Q VLAN..............................................54
Deactivate a port-based or 802.1Q VLAN mode and delete all
VLANs...................................................................................................55
Chapter 5 Manage the Switch in Your Network
Manage NETGEAR Switch Discovery Protocol...............................58
Set up static link aggregation...........................................................58
Set up a link aggregation group..................................................59
Make a link aggregation connection...........................................60
Enable a link aggregation group.................................................60
Manage multicast...............................................................................61
Manage IGMP snooping...............................................................62
Enable a VLAN for IGMP snooping..............................................62
Manage blocking of unknown multicast addresses..................63
Manage IGMPv3 IP header validation.........................................64
Set up a static router port for IGMP snooping...........................65
Change the IP address of the switch................................................66
Reenable the DHCP client of the switch..........................................67
Chapter 6 Maintain and Monitor the Switch
Manually check for new switch firmware and update the switch..69
4
Gigabit Ethernet Plus Switches